- 132 -
∫When connecting by [Manual Setting]
1Touch [Manual Setting].
2Touch [INPUT], then enter the SSID of the wireless access point.
≥For details on how to enter characters, refer to page 65.
≥When the entry is complete, touch [Enter].
3Touch [NEXT], and then touch the desired Network Authentication method.
≥When [WEP] is selected, proceed according to step 5.
4Touch the desired Encryption method.
≥If you select [NONE], a message is displayed after completin g the connection.
5(When selecting [WEP]/[TKIP]/[AES])
Touch [INPUT], then enter the Password.
≥For details on how to enter characters, refer to page 65.
≥When the entry is complete, touch [Enter].
6Touch [NEXT].
≥A message is displayed when the connection is complete.
≥Check the wireless access points instruction manual and settings when saving a wireless access
point.
≥The Encryption methods are [AES], [TKIP] and [WEP] in desce nding order of strength. We
recommend you connect with the strongest possible En cryption method.
≥If no connection can be established, the wireless access poin t’s radio waves may be too weak.
Refer to “Messages” (l173) and “Troubleshooting” (l175) for details.
≥Transmission speed may decrease, or may not be usable depend ing on the environment it is
used in.
Network authentication type Encryption types that can be set
[Open] [NONE]/[WEP]
[WEP] There is no setup of an encryption types.
[WPA-PSK]/[WPA2-PSK] [TKIP]/[AES]
Confirming that the Wi-Fi connection is complete
jThe status indicator of this unit is lit green
j is displayed on the screen
When the preparations for the Wi-Fi function (l123) and the Wi-Fi connection are
complete, you can use the following func tions:
j[Link to Cell] (l137)
j[DLNA Play] (l142)
j[Live Cast] (l143)
j[Home Cam] (l147)