Panasonic HC-V720 Home Monitor Connect, Economy Wi-Fi, Menu Password, Start up using NFC, 152

[Home Monitor Connect]

Please refer to page 147.

[ECONOMY (Wi-Fi)] [ON]/[OFF]

If you set [ON], the LCD monitor turns off when remotely operating this unit with a smartphone (in Motion Picture Recording Mode or Still Picture Recording Mode) so that power consumption is reduced.

≥When the LCD monitor is turned off, you can display the screen by touching it.

≥If the Wi-Fi connection is turned off, this unit will turn off automatically approximately 30 minutes later.

[Menu Password] [Setup]/[Delete]

This will set/clear the Password to limit the startup of the Wi-Fi setting menu.

By setting the Password, it will prevent erroneous operation, prevent wrongful use of the Wi-Fi function by third party, and protect the set personal information.

1Touch [Setup].

2Touch [INPUT], and enter the Password (6 characters).

≥ After finish entering the Password, touch [Enter].

≥ If the Password has already been set, is displayed. ≥ For details on how to enter characters, refer to page 65.

3Touch [NEXT].

4Touch [INPUT], and enter the same Password again.

≥ After finish entering the Password, touch [Enter].

≥ If the Passwords match with each other, a message is displayed.

5Touch [EXIT].

≥If you set the Wi-Fi Password, you will need to enter the Password each time you touch [Wi-Fi Setup] on the Wi-Fi home screen.

≥When you forget your Wi-Fi password, perform [Reset Wi-Fi Settings] from the Setup menu. This will set the Wi-Fi setting to the condition at the time of purchase, and you will be able to use the Wi-Fi setting menu. (l 36)

[Start up using NFC] [ON]/[OFF]

This item allows you to use NFC to turn on this unit, establish a remote connection, and configure the home monitoring settings.

[Reset Wi-Fi Settings]

You can change the Wi-Fi setting back to the default condition.

≥The “LUMIX CLUB” Login ID and Wi-Fi password are also deleted.

- 152 -