Panasonic HC-V720 owner manual 116, About the screen indication of the unit

About the screen indication of the unit

≥When the unit is accessing the SD card, card access icon ( ) appears on the unit screen or the access lamp is on.

≥HC-V720M

When the unit is accessing the built-in memory, built-in memory access icon ( ) appears on the unit screen or the access lamp is on.

≥Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing the media, as this may result in the loss of recorded content.

≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

≥When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder using a USB cable while the unit is turned on, power is also supplied from the connected equipment to this unit.

≥For details on dubbing and playback methods, read the operating instructions of the Blu-ray disc recorder or DVD recorder.

≥When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may appear on the television connected to the Blu-ray disc recorder. In this case as well, perform the operations of Steps 1 to 4.

≥You cannot change the mode of the unit or turn off the unit while it is connected to a Blu-ray disc recorder or DVD recorder. Disconnect the USB cable before performing either of these operations.

≥If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorder to cancel the dubbing.

≥HC-V720M

If you convert the recording format of the scenes recorded in 1080/60p to 1080/60i, you can dub them to devices that do not support AVCHD Progressive. (l 106)

- 116 -