Scan QR code displayed on this unit with a smartphone.

Connecting with QR code

1 Press Wi-Fi button

2 Touch [Wi-Fi Setup].

3 Touch [Direct Connection].

4 Touch [Change connection type].

5 Touch [QR code].

QR code is displayed on the screen of this unit.

6 Start up the smartphone application “Image App”.

7

When using an iOS device, the profile install screen will be displayed on the smartphone. After installing, close the displayed screen by pressing the Home button and relaunch the “Image App”.

Confirming that the Wi-Fi connection is complete

jThe status indicator of this unit is lit green

j is displayed on the screen

Once the Wi-Fi function preparations (l 123) and the Wi-Fi connection are complete, the device's image will be displayed on the smartphone screen and you can use [Link to Cell]. Please refer to page 137 for details about [Link to Cell]

Transmission speed may decrease, or may not be usable depending on the environment it is used in.

- 134 -

Page 134
Image 134
Panasonic HC-V720 owner manual Connecting with QR code, 134, Start up the smartphone application Image App