The attachments and ground drive can now be used. If the engine does not accept the load, restart the engine and allow it to warm up for one minute using the choke as described above.

COLD WEATHER STARTING ( 50 ° F and below)

7.When engine starts, allow engine to run with the throttle control in the

choke position until the engine runs roughly, then move throttle control to fast position. This may require an engine warm-up period from several seconds to several minutes, depending on the temperature.

AUTOMATIC TRANSMISSION WARM UP

Before driving the unit in cold weather,

the transmission should be warmed up as follows:

1.Be sure the tractor is on level ground.

2.Place the motion control lever in neutral. Release the parking brake and let the clutch/brake slowly return to operating position.

3.Allow one minute for transmission to warm up. This can be done during

the engine warm up period.

• The attachments can also be used dur- ing the engine warm-up period after the transmission has been warmed up.

NOTE: If at a high altitude (above 3000 feet) or in cold temperatures (below 32 F) the carburetor fuel mixture may need to be adjusted for best engine performance. (See "TO ADJUST CARBURETOR" in the Service and Adjustments section of this manual.)

PURGE TRANSMISSION

_CAUTION: Never engage or disengage freewheel lever while the engine is run- ning.

To ensure proper operation and per- formance, it is recommended that the

transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the trans- mission which may have developed during shipping of your tractor.

IMPORTANT: Should your transmission require removal for service or replace- ment, it should be purged after reinstall- ation before operating the tractor.

1.Place tractor safely on level surface with engine off and parking brake set.

2.Disengage transmission by placing freewheel control in '"transmission dis-

engaged" position (See "TO TRANS- PORT" in this section of manual).

3.Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

4.Move motion control lever to full

forward position and hold for five (5) seconds. Move lever to full reverse

position and hold for five (5) seconds.

Repeat this procedure three (3) times. NOTE: During this step there will be no movement of drive wheels. The air is being removed from hydraulic drive system.

5.Move motion control lever to neutral

(N)position. Shutoff engine and set parking brake.

6.Engage transmission by placing freewheel control in '"transmission

engaged" position (See "TO TRANS- PORT" in this section of manual).

7.Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half (1/2) speed.

With motion control lever in neutral (N) position, slowly disengage clutch/brake pedal.

8.Slowly move motion control lever for- ward, after the tractor moves approxi- mately five (5) feet, slowly move motion control lever to reverse position. After the tractor moves approximately five

(5) feet return the motion control lever to the neutral (N) position. Repeat this procedure with the motion control lever three (3) times.

Your transmission is now purged and ready for normal operation.

16

Page 16
Image 16
Craftsman 917.27384 owner manual Automatic Transmission Warm UP, Purge Transmission

917.27384 specifications

The Craftsman 917.27384 is a powerful lawn tractor designed to deliver both efficiency and versatility for homeowners who strive for a pristine lawn. Known for its robust construction and functional design, this model is particularly favored for its ability to tackle various lawn care tasks with ease, making it an essential tool for anyone maintaining a sizeable outdoor area.

One of the standout features of the Craftsman 917.27384 is its strong engine performance. It is typically powered by a reliable and efficient 19.5 HP Briggs & Stratton engine, designed to provide ample power to handle tough mowing conditions. This reliable engine ensures smooth operation and longevity, helping users complete their mowing tasks without interruptions for maintenance or repairs.

Another notable characteristic is its cutting deck. The Craftsman 917.27384 comes equipped with a 42-inch cutting deck, which allows for efficient mowing by covering a wide area with each pass. The deck is designed with multiple height adjustment options, providing flexibility to adapt to various grass types and desired cutting lengths. This feature not only enhances the overall appearance of your lawn but also promotes healthy grass growth.

Additionally, this lawn tractor boasts several user-friendly technologies that enhance the mowing experience. The model features a foot-controlled hydrostatic transmission, allowing for smooth acceleration and deceleration without the need for shifting gears. This is particularly beneficial for navigating around obstacles and adjusting speed quickly as needed.

Comfort is another important aspect of the Craftsman 917.27384. It is designed with an ergonomic seat and easy-to-reach controls, ensuring that operators can mow comfortably for extended periods. The 917.27384 also includes a large fuel tank that minimizes refueling frequency, ensuring that users can complete larger jobs without interruption.

In terms of maintenance, the Craftsman lawn tractor is user-friendly, featuring easily accessible components for routine checks and servicing. This attention to detail makes it simple for homeowners to keep the tractor in optimal condition over the years.

Overall, the Craftsman 917.27384 combines power, ease of use, and comfort, making it an excellent choice for homeowners seeking a reliable lawn tractor capable of delivering impressive results. Whether you are mowing, bagging, or mulching, this model is designed to meet diverse lawn care needs effectively.