Mandrel

With Parking Brake "Engaged"

Idler

Pulleys

Nut "A"

Jam Nut

Mandrel

Pulley

TO CHECK AND ADJUST BRAKE

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

1.Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and engage parking brake.

2.Place gear shift lever in neutral (N)

position.

The rear wheels must lock and skid when you try to manually push the tractor for- ward. If the rear wheels rotate, the brake needs to be adjusted or the pads need to be replaced.

TO ADJUST BRAKE

1.Depress clutch/brake pedal all the way down and engage parking brake.

2.Measure distance between brake oper- ating arm and nut "A" on brake rod.

3.If distance is other than 1-1/2", loosen jam nut and turn nut "A" until distance becomes 1-1/2". Retighten jam nut against nut "A".

4.Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest

gear, further maintenance is neces- sary. Replace brake pads or contact a Sears or other qualified service center.

Arm

00238

TO REPLACE MOTION DRIVE BELT

Park the tractor on level surface. Engage parking brake. For assistance, there is a

belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

1.Remove mower (See "TO REMOVE

MOWER" in this section of manual). NOTE: Observe entire motion drive belt

and position of all belt guides and keepers.

2.Remove belt from stationary idler and clutching idler.

3.Remove belt downward from around engine pulley.

4.Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keepers.

5.Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

1.Carefully work new belt down between transaxle belt keepers and onto the input pulley.

2.Slide belt into the center span keeper.

3.Pull belt toward front of tractor and roll around the top groove of engine pulley.

4.Install belt through stationary idler and clutching idler.

5.Make sure belt is in all pulley grooves and inside all belt guides and keepers.

6.Install mower (See "TO INSTALL MOWER" in this section of manual).

24

Page 24
Image 24
Craftsman 917.27475 manual To Check and Adjust Brake, To Check Brake, To Adjust Brake, To Replace Motion Drive Belt

917.27475 specifications

The Craftsman 917.27475 is a lawn tractor that combines power, performance, and versatility, making it an ideal choice for homeowners looking to maintain their outdoor spaces with ease. Equipped with a robust 19 horsepower Briggs & Stratton engine, this model provides reliable starting and efficient performance, ensuring that tackling those large lawns becomes a manageable task.

One of the standout features of the Craftsman 917.27475 is its 42-inch cutting deck, which offers a wide cutting path to handle various terrains. The deck is made of high-quality steel, ensuring durability and a long lifespan. This model also boasts an adjustable cutting height, allowing users to select from various settings to achieve the desired lawn appearance, whether it be a manicured finish or a more natural look.

The tractor's six-speed manual transmission offers users complete control over their mowing speed, enabling them to adjust according to their mowing conditions. Its tight turning radius allows for enhanced maneuverability, making it easier to navigate around flower beds, trees, and other landscaping features, ensuring a clean cut every time.

Comfort is another key feature of the Craftsman 917.27475. It comes with a plush, high-back seat that provides ample support, helping to reduce fatigue during longer mowing sessions. The strategically placed steering wheel and foot pedals ensure that controls are easily accessible, contributing to an enjoyable mowing experience.

Another advantage of this lawn tractor is its versatility. The Craftsman 917.27475 can accommodate various attachments, transforming it into a multi-purpose machine. Whether it's adding a bagger for easy grass collection, a mulching kit for nutrient recycling, or a snow blade for winter use, this tractor can adapt to changing seasonal needs.

Additionally, the model features an easy-to-access fuel tank and a simple maintenance design that allows for hassle-free oil changes and adjustments. With its durable tires designed for traction on various terrains, the Craftsman 917.27475 is built to tackle all types of mowing challenges.

In summary, the Craftsman 917.27475 lawn tractor merges powerful performance with comfort and versatility, making it a valuable investment for homeowners. Its numerous features, combined with ease of use, ensure that maintaining a beautiful lawn is not just a chore but a rewarding experience.