Engine

Center

Clutching..Span

Keeper

Stationary Idler

Transaxle

TRANSAXLE GEAR SHIFT LEVER NEU- TRAL ADJUSTMENT

The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

1.Make sure transaxle is in neutral (N). NOTE: When the tractor rear wheels move

freely, the transaxle is in neutral.

2.Loosen adjustment bolt in front of the right rear wheel.

3.Position the gear shift lever in the neu- tral (N) position.

4.Tighten adjustment bolt securely. NOTE: If additional clearance is needed

to get to adjustment bolt, move mower deck height to the lowest position.

Neutral Lock Gate

Gearshift

 

y,,-"

 

 

......

...... ,:,....

Adjustment Bolt

TO ADJUST STEERING WHEEL ALIGN-

MENT

 

 

l

If steering wheel crossbars are no

 

horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble with crossbars horizontal. Tighten securely.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not

adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or

camber, contact a Sears or other qualified service center.

TO REMOVE WHEEL FOR REPAIRS

1.Block up axle securely.

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key - Do not lose).

3.Repair tire and reassemble.

NOTE: On rear wheels only: align

grooves in rear wheel hub and axle. Insert square key.

4.Replace washers and snap retaining ring securely in axle groove.

5.Replace axle cover.

NOTE: To seal tire punctures and prevent

flat tires due to slow leaks, purchase and use tire sealant from Sears. Tire sealant

also prevents tire dry rot and corrosion.

Washers

Retaining

Ring

Axle

Cover

Square

Key _

_

(Rear

Wheel

Only) _

TO START ENGINE WITH A WEAK BAT-

TERY

_,WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from bat-

teries. Always wear eye protection when around batteries.

If your battery is too weak to start the

engine, it should be recharged. (See "BAT-

TERY" in the MAINTENANCE section of this manual).

If "jumper cables" are used for emergency starting, follow this procedure:

IMPORTANT: Your tractor is equipped with a 12 volt system. The other vehicle must also be a 12 volt system. Do not use your tractor battery to start other vehicles.

TO ATTACH JUMPER CABLES -

1.Connect one end of the RED cable to the POSITIVE (+) terminal of each battery(A-B), taking care not to short against tractor chassis.

2.Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

3.Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

25

Page 25
Image 25
Craftsman 917.27475 manual Ment, To Start Engine with a Weak BAT Tery

917.27475 specifications

The Craftsman 917.27475 is a lawn tractor that combines power, performance, and versatility, making it an ideal choice for homeowners looking to maintain their outdoor spaces with ease. Equipped with a robust 19 horsepower Briggs & Stratton engine, this model provides reliable starting and efficient performance, ensuring that tackling those large lawns becomes a manageable task.

One of the standout features of the Craftsman 917.27475 is its 42-inch cutting deck, which offers a wide cutting path to handle various terrains. The deck is made of high-quality steel, ensuring durability and a long lifespan. This model also boasts an adjustable cutting height, allowing users to select from various settings to achieve the desired lawn appearance, whether it be a manicured finish or a more natural look.

The tractor's six-speed manual transmission offers users complete control over their mowing speed, enabling them to adjust according to their mowing conditions. Its tight turning radius allows for enhanced maneuverability, making it easier to navigate around flower beds, trees, and other landscaping features, ensuring a clean cut every time.

Comfort is another key feature of the Craftsman 917.27475. It comes with a plush, high-back seat that provides ample support, helping to reduce fatigue during longer mowing sessions. The strategically placed steering wheel and foot pedals ensure that controls are easily accessible, contributing to an enjoyable mowing experience.

Another advantage of this lawn tractor is its versatility. The Craftsman 917.27475 can accommodate various attachments, transforming it into a multi-purpose machine. Whether it's adding a bagger for easy grass collection, a mulching kit for nutrient recycling, or a snow blade for winter use, this tractor can adapt to changing seasonal needs.

Additionally, the model features an easy-to-access fuel tank and a simple maintenance design that allows for hassle-free oil changes and adjustments. With its durable tires designed for traction on various terrains, the Craftsman 917.27475 is built to tackle all types of mowing challenges.

In summary, the Craftsman 917.27475 lawn tractor merges powerful performance with comfort and versatility, making it a valuable investment for homeowners. Its numerous features, combined with ease of use, ensure that maintaining a beautiful lawn is not just a chore but a rewarding experience.