Replacing Battery, To Replace Headlight Bulb

If"jumpercables"are usedfor emergency starting,followthis procedure: IMPORTANT:Yourtractor is equipped with a 12 voltsystem.The other vehicle must also be a 12 voltsystem. Do notuse your tractor batteryto start other vehicles.

TOATTACHJUMPERCABLES-

1.Connectone end of the RED cable

to the POSITIVE(+) terminalof each battery(A-B),taking care notto short againsttractorchassis.

2.Connectone end of the BLACKcable to the NEGATIVE(-) terminal(C) of fully chargedbattery.

3.Connectthe other end of the BLACK cable (D)to good chassisground, awayfrom fuel tankand battery.

TO REMOVE CABLES, REVERSE ORDER -

1.BLACK cable first from chassis and then from the fully charged battery.

2.RED cable last from both batteries.

		02614
Weak or Dead	Battery	Fully Charged Battery
REPLACING	BATTERY
_WARNING:	Do not	short battery

terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands,

rings, etc.

Positive terminal must be connected first to prevent sparking from accidental grounding.

1.Lift seat pan to raised position.

2.Disconnect BLACK battery cable first then RED battery cable and carefully remove battery from tractor.

3.Install new battery with terminals in same position as old battery.

4.First connect RED battery cable to positive (+) terminal with hex bolt and

keps nut as shown. Tighten securely. Slide terminal cover over terminal

5.Connect BLACK grounding cable to negative (-) terminal with remaining hex bolt and keps nut. Tighten securely.

Terminal

Keps

Nut _Hex

Bolt

Positive (Red) Cable Negative (Black) Cable

TO REPLACE HEADLIGHT BULB

1.Raise hood.

2.Pull bulb holder out of the hole in the backside of the grill.

3.Replace bulb in holder and push bulb holder securely back into the hole in

the backside of the grill.

4.Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause

your tractor to run poorly, stop running, or prevent it from starting.

• Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type

plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL AS-

SEMBLY

1.Raise hood.

2.Unsnap headlight wire connector.

3.Stand in front of tractor. Grasp hood at

sides, tilt toward engine and lift off of tractor.

4.When replacing hood, be sure to re- connect the headlight wire connector.

Hood

_xHeadn'iegc_trVVire

917.2754 specifications

The Craftsman 917.2754 is a state-of-the-art lawn tractor that stands out in the market for its robust features, advanced technologies, and practical design aimed at enhancing user experience and mowing efficiency. It is particularly favored by homeowners with extensive lawns, thanks to its powerful engine and user-friendly functionality.

One of the key features of the Craftsman 917.2754 is its powerful 24 HP engine, which provides ample horsepower to tackle various terrains and challenging mowing conditions. The engine is not only efficient but also reliable, ensuring that users can depend on it season after season. Coupled with a hydrostatic transmission, the driving experience is smooth, allowing for effortless control over speed and direction without the hassle of shifting gears.

The 42-inch cutting deck of the Craftsman 917.2754 is designed for optimal performance and efficiency. This size makes it perfect for maneuvering in tighter spaces while still covering a significant area of lawn in a single pass. The deck features an adjustable cutting height, allowing users to customize their mowing experience based on grass type and weather conditions, ensuring a clean and precise cut every time.

Another highlight of the Craftsman 917.2754 is its comfortable seating and ergonomic design. The high-back seat provides exceptional support, allowing users to maintain comfort during long mowing sessions. The intuitive control panel is user-friendly, equipped with easy-to-read dials and controls for direct access to critical functions such as throttle and cutting height adjustments.

For added convenience, the Craftsman 917.2754 also includes a tight turning radius, making it easier to navigate around obstacles like flower beds and trees. This feature reduces the need for additional trimming, saving users both time and effort. Furthermore, the integrated mulching capability allows for efficient grass recycling, promoting healthier lawn growth.

Durability is a hallmark of the Craftsman brand, and the 917.2754 exemplifies this with its sturdy construction and long-lasting components. Owners can enjoy peace of mind knowing that their investment is built to withstand the rigors of regular lawn maintenance.

In summary, the Craftsman 917.2754 lawn tractor combines power, efficiency, and comfort into a single machine, making it an excellent choice for homeowners looking to maintain their lawn effortlessly. Its advanced features and practical design set it apart in the lawn care landscape, providing users with a dependable and enjoyable mowing experience.

Craftsman 917.2754 owner manual Replacing Battery, To Replace Headlight Bulb

Models: 917.2754