TO REPLACE MOWER DRIVE BELT
MOWER DRIVE BELT REMOVAL
1.Park tractor on a level surface. Engage parking brake,
2.Remove screws from L.H. mandrel cover and remove cover,
3.Roll belt over the top of LH. mandrel pulley.
4.Remove belt from electric clutch pulley.
5.Remove belt from idler pulleys.
6.Remove any dirt or grass c_ippings which may have accumulated around
mandrels and entire upper deck sur- face.
7.Check primary idler arm and two idlers to see that they rotate freely.
8.Be sure spring is securely hooked to primary idler arm and bolt in mower housing.
MOWER DRIVE BELT INSTALLATION
9.Install belt in both idlers. Make sure
belt is in both belt keepers at the idlers as shown.
10.Install new belt onto electric clutch pul-
Py.
11.Roll belt into upper groove of L.H, man- drel pulley,
12.Carefully check belt muting making sure belt is in the grooves correctly and inside belt keepers,
13.Reassemble LH. mandrel cover.
Screws
L.H.
MandrelIdler
CoverPulleys
Electric
Primary Idler ArmClutch
Spring Pulley
L.H.
Mandrel
Bolt in
Mower
Housing
Mower Drive Belt
Belt Keepers
24
