NOTE: You may now roll your tractor off the skid. Followthe appropriate instruction below to removethe tractor from the skid.
_b, WARNING" Before starting, read, un- derstand and follow all instructions in the
Operation section of this manual. Ensure tractor is in a
the area in front of tractor is clear of other people and objects.
TO ROLL TRACTOR OFF SKID
(See Operation section for location
and function of controls)
1.Raise attachment lift lever to its high- est position.
2.Release parking brake by depressing clutch/brake pedal.
3.Place gearshift lever in neutral posi- tion.
4.Roll tractor forward off skid.
5.Remove banding holding the deflector
shield up against tractor.
Continue with the instructions that follow.
CHECK TIRE PRESSURE
The tires on your tractor were overinfiated at the factory for shipping purposes. Cor- rect tire pressure is important for best cutting performance.
•Reduce tire pressure to PSI shown on tires.
CHECK DECK LEVELNESS
For best cutting results, mower hous-
ing should be properly leveled. See "TO LEVEL MOWER" in the Service and
Adjustments section of this manual.
CHECK FOR PROPER POSITION OF ALL BELTS
See the figures that are shown for replac- ing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.
CHECK BRAKE SYSTEM
After you learn how to operate your trac- tor, check to see that the brake is operat- ing properly. See "TO CHECK BRAKE"
in the Service and Adjustments section of this manual.
,/CHECKLIST
Before you operate your new tractor, we wish to ensure that you receive the best performance and satisfaction from this Quality Product.
Please review the following checklist: ,/* All assembly instructions have been
completed.
,/* No remaining loose parts in carton. ,/* Battery is properly prepared and
charged.
,/* Seat is adjusted comfortably and tight- ened securely.
,/* All tires are properly inflated. (For ship- ping purposes, the tires were overin- flated at the factory).
,/* Ensure mower deck is properly leveled
,/* Check mower and drive belts. Ensure they are routed properly around pulleys and inside all belt keepers.
,/* Check wiring. See that all connections are still secure and wires are properly clamped.
While learning how to use your tractor, pay extra attention to the following important items:
,/* Engine oil is at proper level.
,/* Fuel tank is filled with fresh, clean, regu- lar unleaded gasoline.
,/* Become familiar with all controls, their location and function. Operate them before you start the engine.
,/* Ensure brake system is in safe operat- ing condition.
,/* Ensure Operator Presence System and Reverse Operation System (ROS)
are working properly (See the Opera- tion and Maintenance sections in this
manual).
8
