![IT] l l l](/images/new-backgrounds/99804/998047x1.webp)
PRODUCT SPECIFICATIONS
GASOLINE | 3 QUARTS |
CAPACITY: | UNLEADED |
| REGULAR |
OIL | SAE 30 |
| (ABOVE 32°F) |
CAPACITY: 20OZ.) | SAE |
| (BELOW 32°F) |
SPARK PLUG : | CHAMPION |
(GAP: .030") | RJ19LM OR |
| J19LM |
CONGRATULATIONS on your purchase of a Sears Tiller.It has been designed, engineered and manufacturedto give you the best possibledependabilityand performance.
Shouldyou experience any problemsyou cannot easily remedy,please contacta Sears or other qualifiedService Center. We have
Please read and retainthis manual. The instructionswill enable you to assemble
and maintainyour tiller propedy.Always observethe =SAFETY RULES".
Yournew tiller has been assembledat the
factory with exceptionof those parts left unassembledfor shippingpurposes. To ensuresafe and properoperationof your tiller all parts and hardwareyou as- semble must be tightenedsecurely.Use the correcttools as necessaryto insure proper tightness.
CUSTOMER RESPONSIBILITIES
•Read and observe the safety rules.
•Follow a regular schedule in maintain- ing, caring for and using your tiller.
•Follow the instructions under the _Customer Responsibilities" and
"Storage" sections of this Owner's
Manual.
_WARNING: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved
In the state of California the above is required by law (Section 4442 of the California Public Resources Code).
Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest Sears service center (See REPAIR PARTS section of this manual).
These accessories were available when the tiller was pumhased. They are also available at most Sears Retail outlets and Service Centers. Most Sears Stores can
order repair parts for you when you provide the model number of your tiller.
ENGINE
IT] l l l
TILLER MAINTENANCE
BELTTINESSHEAR PINHAIRPIN CLIP
4