![HOWTO USEYOURTILLER](/images/new-backgrounds/99804/9980415x1.webp)
The operation of any tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling. We recommend a wide vision safety mask over spectacles or standard safety glasses.
HOWTO USEYOURTILLER
Knowhow to operateall controlsbefore addingfuel and oil or attemptingto start engine.
STOPPING
TINES
1.Release forwardtine controlto stop forward movement.
2.Release reverse tine controlto stop reverse movement.
ENGINE
•Move throttlecontrolto "STOP" posi- tion.
NOTE: Never use choke to stopengine.
Reverse Tine Control Forward Tine Control
_2+'A.+.,_.
si_ion
0J/ Forward Tine Control
._"ON" (DOWN) Position
Throttle
Control
Control
The depth stake should always be below
the wheels for digging. It serves as a brake to slow the tillers forward motion to
enable the tines to penetrate the ground. Also, the more the depth stake is lowered into the ground the deeper the tines will dig.
DEPTH STAKE
Adjust depth stake by removing the
hairpin clip and clevis pin. Change depth stake to desired position. Replace the clevis pin and hairpin clip.
•For normal tilling, set depth stake at the second or third hole from the top.
WHEELS
Adjust wheels by removing the hairpin clip and clevis pin. Change wheel position. Replace the hairpin clip and clevis pin.
•For normal tilling, set wheels at the second or third hole from the top.
HairpinClip
and Clevis Pin
Stake
| HairpinClip |
Spring | and ClevisPin |
"lINE OPERATION
FORWARD
•Squeeze forward tine control to handle.
REVERSE
•With forward fine control "OFF" (up) position, pull back and hold reverse tine control.
TILLING
The speed and depth of tilling is regu- lated by the position of the depth stake and wheel height.
TO TRANSPORT
_CAUTION: Beforeliftingor transporting, allowtiller engine and mufflerto cool. Disconnectspark plug wire. Drain
gasolinefrom fuel tank.
AROUND THE YARD
1.Tip depth stake forward untilit is held by the stake spring,
2.Push tiller handles down, raising tines off the ground.
3.Push or pull tiller to desired location.
AROUND TOWN
1.Disconnectspark plug wire.
2.Drain fuel tank.
3.Transportin updghtpositionto prevent oil leakage.