A WARNING: To avoid serious injury, before performing any service and adjustments:

1.Release control bar and stop engine.

2.Make sure the blade and all moving parts have completely stopped.

3.Disconnect spark plug wire from spark plug and place wire where it cannot come in

contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual.

REAR DEFLECTOR

The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator mowing position. If the deflector becomes damaged, it should be replaced.

TO REMOVE DRIVE BELT

1.Remove screws securing rear baffle.

2.Turn lawn mower on its side with air filter and carburetor down.

3.Remove rear baffle from mower.

4.Remove blade bolt, Iockwasher, hard- ened washer and blade.

5.Remove debris shield.

6.Remove gearcase belt keeper.

7.Remove drive belt.

 

Gearcase

 

belt keeper

Rear

Belt

 

retainer

Gearcase

pulley

 

\\i

'}

Blade

 

adapter \

'}

Debris shield

TO REPLACE DRIVE BELT

1.Place new drive belt on gearcase pul- ley.

NOTE: Always use factory approved belt to assure proper fit and long life.

2.Reinstall gearcase belt keeper. Be sure the new drive belt is inside the

tabs of the gearcase belt keeper.

3.Position the blade adapter on the en- gine crankshaft. Be sure key in adapter and crankshaft keyway are aligned; and that the new drive belt is inside the tabs of the belt retainer.

4.Place rear baffle in mower housing.

5.Reinstall debris shield.

6.Reinstall blade.

7.Return mower to upright position.

8.Reinstall rear baffle screws.

TO ADJUST HANDLE

Your handle has three (3) height positions

-adjust to a height that suits you.

1.Remove knob and carriage bolt on one side of the lower handle.

2.While holding handle assembly, remove knob and carriage bolt from

opposite side, align hole in handle with desired hole in handle bracket and

reassemble bolt and knob and tighten securely.

3.Align opposite side of handle with same positioning hole and secure with bolt and knob.

Handle bracket

Knob

Bolt

Hardened

 

 

Blade

 

Blade

 

 

bolt

 

Lockwasher

17

 

 

Page 17
Image 17
Craftsman 917.374360 owner manual Rear Deflector, To Remove Drive Belt, To Adjust Handle, To Replace Drive Belt

917.374360 specifications

The Craftsman 917.374360 is a robust and reliable lawn tractor designed for homeowners seeking efficiency and performance in their lawn care routine. With features that cater to both ease of use and powerful performance, this machine stands out in the crowded market of lawn maintenance equipment.

One of the main features of the Craftsman 917.374360 is its powerful 24 HP Briggs & Stratton engine. This engine provides ample power for tackling even the toughest of lawns, ensuring that users can cut through thick grass and uneven terrain with minimal effort. Coupled with a 54-inch cutting deck, the tractor enables users to cover a significant area in a shorter amount of time, making it an excellent choice for larger properties.

The Craftsman 917.374360 also incorporates a hydrostatic transmission, which allows for smooth and seamless speed changes. This type of transmission provides users with greater control over their mowing speed, enhancing the overall mowing experience. The user-friendly foot pedal control further adds to the convenience, allowing for effortless operation without the need to repeatedly change gears.

Ergonomics play a critical role in the design of this lawn tractor. The high-back seat provides comfort during long mowing sessions, while the adjustable steering wheel ensures that users of all heights can find a comfortable operating position. Additionally, the tractor features an easy-to-use dash panel that displays all necessary information, including fuel level and engine status, allowing the operator to keep track of performance at a glance.

The Craftsman 917.374360 incorporates innovative technologies such as a dual-blade system, which promotes a cleaner cut and helps in maintaining a healthy lawn. The mulching capability allows for grass clippings to be finely chopped and recycled back into the lawn, providing natural nutrients to the soil and reducing the need for bagging.

Furthermore, the tractor is equipped with a reinforced steel frame, providing durability and longevity. This robust construction is essential for withstanding the wear and tear often associated with regular lawn maintenance. With an array of attachment options, including baggers and tow-behind trailers, the Craftsman 917.374360 can be customized for a variety of tasks, making it a versatile tool for any homeowner.

In conclusion, the Craftsman 917.374360 stands out as a reliable and efficient lawn tractor with features and technologies designed to enhance the user experience. From its powerful engine to its ergonomic design, this machine promises to make lawn care a breeze. Whether it's a sprawling estate or a modest backyard, the Craftsman 917.374360 is equipped to deliver impressive results with ease and comfort.