BEFORE STARTING ENGINE

ADD OIL

Your lawnmower is shipped without oil in the engine. For type and grade of oil to use, see "ENGINE" in the Maintenance section of this manual.

,A CAUTION: DO NOT overfill engine with oil, or it will smoke heavily from the muffler on startup.

1.Be sure lawnmower is level.

2.Remove oil dipstick from oil fill spout.

3.You receive a container of oil with the

unit. Slowly pour the entire container down the oil fill spout into the engine.

NOTE: Initial oi! fill requires only 18 oz. due to residual oil in engine from the manufacturers 100% quality testing. When changing oil you may need 20 oz.

4.Insert and tighten dipstick.

IMPORTANT:

• Check oil level before each use. Add oil

if needed. Fill to full line on dipstick.

•Change the oil after every 25 hours of operation or each season. You may need to change the oil more often under dusty, dirty conditions. See "TO CHANGE ENGINE OIL" in the Mainte- nance section of this manual.

Engine oil cap

Gasoline

filler cap

ADD GASOLINE

•Fill fuel tank to bottom of tank filler neck. Do not overfill. Use fresh, clean, regular unleaded gasoline with a minimum of

87 octane. Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel fresh- ness.

A CAUTION: Wipe off any spilled oil or fuel. Do not store, spill or use gasoline

near an open flame.

ii, CAUTION: Alcohol blended fuels (called gasohol or using ethanol or metha- nol) can attract moisture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Empty the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. See Storage Instructions for additional information. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

TO STOP ENGINE

•To stop engine, release operator pres- ence control bar.

TO START ENGINE

NOTE: Due to protective coatings on the engine, a small amount of smoke may be

present during the initial use of the product and should be considered normal.

1.To start a cold engine, push primer three (3) times before trying to start. Use a firm push. This step is not usually necessary when starting an engine which has already run for a few minutes.

2.Hold operator presence control bar down to the handle and pull starter handle quickly. Do not allow starter rope to snap back.

NOTE: In cooler weather it may be necessary to repeat priming steps. In warmer weather over priming may cause flooding and engine will not start. If you do flood engine, wait a few minutes before attempting to start and do not repeat priming steps.

9

Page 8 Page 10
Page 9
Image 9
Craftsman 917.375013 manual Before Starting Engine, Add Oil, ADD Gasoline, To Stop Engine, To Start Engine
Page 8 Page 10

917.375013 specifications

The Craftsman 917.375013 is a standout model in the realm of lawn care and landscaping, celebrated for its robust build and high performance. This riding mower is engineered to provide an efficient and comfortable mowing experience, making it a favorite among homeowners with sizable lawns who prioritize both functionality and ease of use.

One of the main features of the Craftsman 917.375013 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, it delivers the strength needed to tackle tough grass conditions while ensuring longevity and minimal maintenance. The engine's performance is complemented by an automatic transmission that allows for smooth speed adjustments, enabling users to navigate varying terrains effortlessly.

The mower boasts a 42-inch cutting deck, which strikes an ideal balance between maneuverability and cutting efficiency. This width allows it to cover substantial lawn areas quickly while still fitting in tight spaces. Additionally, the cutting deck features multiple height adjustments, giving users full control over the length of grass left behind, which is crucial for maintaining a healthy lawn.

Another noteworthy characteristic of the Craftsman 917.375013 is its user-friendly design. The comfortable ergonomic seat is designed for extended use, allowing operators to maintain focus on mowing rather than fatigue. The easy-to-use dash controls provide convenient access to all essential functions, including cutting height and blade engagement, making it simple for users of all experience levels to operate.

This model also incorporates advanced technologies such as a tight turning radius, which enhances its maneuverability around flower beds and trees. The durable steel frame design ensures stability and resilience against the wear and tear of frequent use, while the integrated headlights add a level of convenience for those who prefer early morning or late evening mowing.

In summary, the Craftsman 917.375013 is a feature-rich riding mower designed with performance, comfort, and durability in mind. With its powerful engine, versatile cutting deck, and user-friendly features, it represents an excellent investment for anyone looking to keep their lawn in pristine condition. Whether you're a seasoned landscaper or a weekend warrior, this mower promises to meet your needs with precision and ease.
Top Page Image Contents