Craftsman 917.376241 owner manual Rear Deflector, To Remove Drive Belt, To Adjust Handle

Models: 917.376241

1 52
Download 52 pages 56.58 Kb
Page 17
Image 17

A WARNING: To avoid serious injury, before performing any service and adjustments:

1.Release control bar and stop engine.

2.Make sure the blade and all moving parts have completely stopped.

3.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual.

REAR DEFLECTOR

The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator mowing position. If the deflector becomes damaged, it should be replaced.

TO REMOVE DRIVE BELT

1.Remove drive cover and belt keeper.

2.Remove belt from gearcase pulley.

3.Turn lawn mower on its side with air filter and carburetor down.

4.Remove blade and blade adapter.

5.Remove belt from engine pulley.

Drive cover

\

Gearcase pulley

Belt 3er

NOTE: Always use factory approved belt to assure proper fit and long life.

Blade

adapter

Key

Crankshaft

Lockwasher

 

 

 

Blade

 

 

 

 

 

......o

 

 

 

/

Blade

 

 

 

bolt

Hardened

,,

'_

 

washer

Trailing/edge

retainer

TO ADJUST HANDLE

The handle on your lawn mower has three

(3)height positions - adjust to height that suits you.

1.Remove knob and carriage bolt on one side of the lower handle.

2.While holding handle assembly, remove knob and carriage bolt from opposite side, align hole in handle with desired hole in handle bracket and reassemble bolt and knob and tighten securely.

3.Align opposite side of handle with same positioning hole and secure with bolt and knob.

Handle bracket

Knob

J

Belt

Bolt

TO REPLACE DRIVE BELT

1.Place new drive belt on engine pulley, inside tabs of belt retainer.

2.Route the other end of the new drive belt through hole in housing.

3.Reinstall blade adapter and blade.

4.Return mower to upright position.

5.Install new belt on gearcase pulley.

6.Reinstall belt keeper and drive cover.

17

Page 17
Image 17
Craftsman 917.376241 owner manual Rear Deflector, To Remove Drive Belt, To Adjust Handle, To Replace Drive Belt

917.376241 specifications

The Craftsman 917.376241 is a reliable riding mower designed for homeowners seeking efficiency and performance in lawn care. This mower combines advanced features and technologies, making it an excellent choice for tackling a variety of mowing tasks.

One of the standout characteristics of the Craftsman 917.376241 is its powerful engine. Equipped with a robust 24 HP Kohler engine, it ensures smooth starts and reliable performance across different terrains. The engine offers a dependable solution for even larger lawns, providing the power needed to handle tough grass and uneven surfaces.

Another noteworthy feature is the 42-inch cutting deck. The deck is designed for precision cutting, allowing users to cover more ground in fewer passes while achieving an even cut. It also offers adjustable cutting heights, enabling operators to customize the mower's performance based on their grass type and desired finish. This versatility is particularly beneficial for homeowners looking to maintain a manicured lawn.

The Craftsman 917.376241 also boasts a hydrostatic transmission, offering seamless speed control without the need for cumbersome shifting. This technology not only enhances user comfort but also allows for smoother operation, especially when navigating turns or uneven terrain. The mower’s maneuverability is further improved by its tight turning radius, making it easier to navigate around flower beds, trees, and other obstacles.

Safety features are another priority in the design of the Craftsman 917.376241. It is equipped with a seat switch that ensures the mower will automatically shut off if the operator leaves the seat, preventing accidents. Additionally, the mower's robust build includes reinforced structures designed to withstand the rigors of regular use.

Comfort is also a key aspect of this riding mower. It features an ergonomic seat and dashboard layout, ensuring that users can operate the mower with ease and minimal fatigue. The inclusion of cup holders and storage compartments highlights Craftsman's focus on user convenience.

In summary, the Craftsman 917.376241 is a well-rounded riding mower ideal for homeowners looking to maintain a beautiful lawn with efficiency and ease. Its powerful engine, adjustable cutting deck, hydrostatic transmission, and safety features combine to make it a top choice in the riding mower market. Whether you are managing a small yard or a larger landscape, this mower provides the performance and reliability necessary to get the job done right.