Engine, Other, Fuel System, Cylinder, Battery

ENGINE

FUEL SYSTEM

IMPORTANT: It is important to prevent

gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose, or tank during storage. Alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation

of acids during storage. Acidic gas can damage the fuel system of an engine while in storage.

•Empty the fuel tank by starting the en- gine and letting it run until the fuel lines and carburetor are empty.

•Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

•Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable al- ternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer

container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to

reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" in the Maintenance section of this manual).

CYLINDER

1.Remove spark plug.

2.Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

3.Pull starter handle slowly a few times to distribute oil.

4.Replace with new spark plug.

BATTERY

Disconnect the battery from the engine connector and charge battery 48 hours.

OTHER

•Do not store gasoline from one season to another.

•Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

•If possible, store your unit indoors and cover it to protect it from dust and dirt.

•Cover your unit with a suitable protec- tive cover that does not retain moisture.

Do not use plastic. Plastic cannot breathe, which allows condensation to

form and will cause your unit to rust. IMPORTANT: Never cover mower while

engine and exhaust areas are still warm. ,I_CAUTION: Never store the lawn

mower with gasoline in the tank inside a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

TROUBLESHOOTING =See appropriate section in manual unless directed

to a Sears Parts & Repair Center.

PROBLEM

CAUSE

CORRECTION


Does not start	.	Dirty	air		filter.
	2.	Out	of fue!.
	3.	Stale		fuel.
	4.	Water		in fuel.
	5.	Spark		plug wire is
		disconnected.
	6.	Bad spark					plug.
	7.	Loose		blade				or broken
		blade		adapter.
	8.	Control			bar		in released
		position.
	9.	Control			bar		defective.
	10. Fuel valve lever (if so
		equipped)				in OFF position.
	11.	Weak		battery				(if equipped).
	12. Disconnected							battery
		connector				(if equipped).
	13. Blown fuse (if equipped).

. Clean/replace air filter.

2.Fill fuel tank.

3.Empty fuel tank and refill tank with fresh, clean gasoline.

4.Empty fuel tank and refill tank with fresh, clean gasoline.

5.Connect wire to plug.

6.Replace spark plug.

7.Tighten blade bolt or replace blade adapter.

8.Depress control bar to handle.

9.Replace control bar.

10.Turn fuel valve lever to the ON position.

11.Charge battery.

12.Connect battery to engine.

13.Replace fuse.

917.376531, 37653 specifications

The Craftsman 37653,917.376531 is a powerful and versatile power tool designed to meet the needs of both professional contractors and DIY enthusiasts. This tool stands out for its robust build quality and reliability, making it a cornerstone for any workshop or job site.

At the core of the Craftsman 37653 is a high-performance motor that provides impressive torque output, enabling users to tackle a wide variety of tasks with ease. Whether you're drilling, driving screws, or working with tough materials, this tool is engineered to deliver consistent performance. The variable speed settings allow users to adjust the speed according to the materials and tasks at hand, offering precision and control for intricate projects.

One of the standout features of the Craftsman 37653 is its ergonomic design. It boasts a comfortable grip that reduces fatigue during prolonged use, allowing users to work longer without discomfort. The tool's lightweight nature enhances portability, making it easy to transport from job to job or to work in confined spaces.

In terms of technologies, the Craftsman 37653 incorporates advanced battery management systems that ensure optimal battery life and performance. This allows users to work without worrying about frequent recharging, boosting productivity on the job. The quick-charge capability further enhances usability, giving users the ability to get back to work swiftly.

Durability is another key characteristic of the Craftsman 37653. Constructed from high-quality materials, it is designed to withstand tough working conditions, providing peace of mind to users who might operate in demanding environments. Additionally, the tool often comes with a protective case, which not only aids in storage but also provides extra protection during transport.

Safety is of paramount importance in power tools, and the Craftsman 37653 delivers with features such as a built-in safety lock. This prevents accidental activation, crucial for maintaining user safety during operation. Moreover, the design frequently includes LED lights that illuminate the work area, allowing for better visibility in low-light conditions.

In conclusion, the Craftsman 37653,917.376531 combines power, versatility, and safety, making it an indispensable tool for anyone serious about craftsmanship. Whether for home improvement or professional construction, its features, technologies, and characteristics cater to a broad spectrum of applications, ensuring it stands as a reliable partner in any project.

Craftsman 917.376531 owner manual Engine, Other, Fuel System, Cylinder, Battery

Models: 917.376531 37653