ENGINE SPEED
Tubular frame Sewn
Your engine speed has been factory set Do not attempt to increase engine speed or it may result in personal injury, If you believe that the engine is running too fast or too slow, take your lawn mower to an authorized service center for repair and adjustment
CARBURETOR
Your carburetor has a
pected carburetor problems, take your lawn mower to an authorized service
center for repair and/or adjustment
TO ASSEMBLE GRASS CATCHER
o Insert leg of tubular frame through front opening of grass catcher and thread frame into sewn hem of bag.
NOTE: Keep bag hem gathered on the
straight leg of the tubular frame,
o When frame comes out the other end of sewn hem, immediately work the end of
frame down inside the bag as shown in inset,
o Slide sewn hem evenly around the tubular frame until both ends of frame
are exposed out of the front opening.
o Assemble lower frame to tubular frame as shown. Be sure handle is outside of
bag and frames are fully seated as shown in inset.
• Slip vinyl bindings over frame.
NOTE: tf vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before using
o Close the flip lid. Flip lid must be closed while operating lawn mower,
CAUTION: Do not run your lawn mower without clipping deflector or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open
Sewn hem Flip lid
Lower frame |
|
must be | |
, ..." | fully |
| seated) |
Tabular frame
Lower frame handle
\
Jny,bindings
15
