LUBRmCATmON

Use only high quality detergent oil rated with API service classification SG-SL. Select the

oil's SAE viscosity grade according to your expected operating temperature.

SAE VISCOSITY GRADES

-20

 

0

30

32

40

60

80

100

-io

-2;

-1;

 

;

 

1;

_o

_o 4;

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in

cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°R Check your engine oil level more frequently to avoid possible engine damage from running low on oil. Change the oil after every 25 hours of op- eration orat least once a year if the mower is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use. Tighten oil plug securely each time you check the oil level.

TO CHANGE ENGINE OIL

NOTE: Before tipping lawn mower to drain oil, empty fuel tank by running engine until fuel tank is empty.

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Remove engine oil cap; lay aside on a clean surface.

3.Tip lawn mower on its side as shown and drain oil into a suitable container.

Rock lawn mower back and forth to re- move any oil trapped inside of engine.

6.Stop adding oil when you reach the FULL mark on the dipstick. Wait a minute to allow oil to settle.

7.Continue adding small amounts of oil, rechecking the dipstick until oil level settles at FULL. DO NOT overfill, or engine will smoke heavily from the muffler on startup.

8.Always be sure to retighten oil dipstick before starting engine.

9.Reconnect spark plug wire to spark plug.

AIR FILTER

Your engine will not run properly and may be damaged by using a dirty air filter. Replace the air filter cartridge every

100 hours of operation or every season, whichever occurs first. Service air cleaner

more often under dusty conditions.

TO CLEAN AIR FILTER

1.Loosen screw and tilt cover to remove.

2.Carefully remove cartridge.

3.Clean by gently tapping on a flat sur-

face. If very dirty, replace cartridge.

ACAUTION: Petroleum solvents, such as kerosene, are not to be used to clean cartridge. They may cause deterioration of the cartridge. Do not oil cartridge. Do not use pressurized air to clean or dry cartridge.

4.Install cartridge, then replace cover making sure the tabs are aligned with the slots in the back plate. Fasten screw securely.

Back I

Slots

Lip

Cover

Cartridge Cover tabs

Container

4.Wipe off any spilled oil from lawn mower or side of engine.

5.Slowly pour oil down the oil fill spout, stopping every few ounces to check the oil level with the dipstick.

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in the "PRODUCT SPECIFIC- ATIONS" section of this manual.

14

Page 13 Page 15
Page 14
Image 14
Craftsman 917.37892 manual To Change Engine OIL, To Clean AIR Filter, Muffler, Spark Plug
Page 13 Page 15

917.37892 specifications

The Craftsman 917.37892 is a versatile and efficient riding mower designed for homeowners who value performance and reliability in lawn care. This machine combines innovative technologies with user-friendly features, making it a top choice for maintaining a well-manicured lawn.

One of the standout characteristics of the Craftsman 917.37892 is its robust engine. Powered by a reliable Briggs & Stratton 19 horsepower engine, this mower provides ample power to tackle tough grass and uneven terrains. The reliable engine ensures efficient performance, allowing users to cover more ground in less time. Its electric start feature makes starting the mower a breeze, eliminating the need for manual pull starts.

The mowing deck of the Craftsman 917.37892 is designed for precision and flexibility. With a 42-inch cutting deck, it offers an optimal balance between maneuverability and cutting efficiency. The deck height is adjustable, giving users the ability to customize their mowing height, which is essential for achieving the desired lawn appearance. Furthermore, the deck is equipped with a mulching capability, allowing users to finely chop grass clippings and return them to the lawn as natural fertilizer.

In terms of comfort, the Craftsman 917.37892 features an ergonomic seat and a user-friendly control panel. The high-back seat provides support during long mowing sessions, while the easy-to-reach controls make navigating the mower straightforward even for novice users. The mower's turning radius is tight, allowing it to maneuver around flower beds and landscaping with ease.

Technologically, the Craftsman 917.37892 boasts a durable construction featuring a steel frame and front axle, ensuring stability and longevity. Its unique rear-wheel drive enhances traction and control, aiding in the management of various terrains. The machine is also designed with safety features like an automatic shut-off that engages when the operator leaves the seat, providing peace of mind during operation.

Overall, the Craftsman 917.37892 combines power, comfort, and advanced technology to deliver an exceptional mowing experience. Whether managing a small residential lawn or tackling a larger property, this riding mower stands out as a practical choice for anyone looking to maintain a vibrant and healthy lawn. With its combination of features, the Craftsman 917.37892 ensures efficient performance, making it a valuable addition to any home gardening toolkit.
Top Page Image Contents