Manuals / Craftsman / Lawn and Garden / Lawn Mower

Craftsman 917.37892 manual Lever Backward, To Lower Mower

Models: 917.37892

1 44
Download 44 pages 46.97 Kb
Page 8
Image 8

The operationof any lawn SA_ETYGLASSBmowercan result in foreign

objects thrown into the eyes, which can result in severe eye damage. Always

wear safety glasses or eye shields while operating your lawn mower or performing any adjustments or repairs. We recom- mend a standard safety glasses or wide vision safety mask worn over spectacles.

HOW TO USE YOUR LAWN MOWER

ENGmNESPEED

The engine speed was set at the factory for optimum performance. Speed is not adjustable.

ENGmNE ZONE CONTROL

_iI,CAUTmON: Federal regulations require

an engine control to be installed on this lawn mower in order to minimize the

risk of blade contact injury. Do not under

any circumstances attempt to defeat the function of the operator control. The blade turns when the engine is running.

Your lawn mower is equipped with an operator presence control bar which

requires the operator to be positioned behind the lawn mower handle to start

and operate the lawn mower.

DRmVE CONTROL

Self-propelling is controlled by hold- ing the operator presence control bar down to the handle and pulling the drive control bar up to the handle. The closer to the handle the bar is pulled, the faster the unit will travel.

Forward motion will stop when either the operator presence control bar or drive control bar are released. To stop forward motion without stopping engine, release the drive control bar only. Hold operator presence control bar down against handle to continue mowingwithout self-propelling.

NOTE: If after releasing the drive control the mower will not roll backwards, push

the mower forward slightly to disengage drive wheels.

To keep drive control engaged when

turning corners, push down on the handle to lift the front wheels off the

ground while turning lawn mower.

)resence control bar

Drive control bar

DRIVEDRIVE

CONTROLCONTROL

ENGAGEDDISENGAGED

DRIVE CONTROL ADJUSTMENT

Over time, the drive control system may become "loose", resulting in decreased speed. There is a thumbscrew on the

underside of the drive control housing to increase tension on the drive cable. Pro-

ceed as follows:

1.Turn unit off and disconnect spark plug wire from spark plug.

2.Rotate thumbscrew counter-clockwise to tighten the drive cable.

3.Operate mower to test drive speed.

4.If condition fails to improve after the above steps (forward speed remains the same), your drive belt is worn and should be replaced.

NOTE: If mower begins to "creep" forward,

the drive cable is too tight. Rotate thumb- screw clockwise to loosen drive cable.

TO ADJUST CUTTmNG HEmGHT

Raise wheels for low cut and lower wheels for high cut, adjust cutting height to suit

your requirements. Medium position is best for most lawns.

To change cutting height, squeeze ad- juster lever toward wheel. Move wheel up or down to suit your requirements. Be sure all wheels are in the same setting.

NOTE: Adjuster is properly positioned when plate tab inserts into hole in lever. Also, 9-position adjusters (if so equipped) allow lever to be positioned between the plate tabs.

LEVER BACKWARD

Plate tab

TO LOWER MOWER

 

LEVER FORWARD TO RAISE MOWER Lever

Page 7 Page 9
Page 8
Image 8
Craftsman 917.37892 manual Lever Backward, To Lower Mower
Page 7 Page 9

917.37892 specifications

The Craftsman 917.37892 is a versatile and efficient riding mower designed for homeowners who value performance and reliability in lawn care. This machine combines innovative technologies with user-friendly features, making it a top choice for maintaining a well-manicured lawn.

One of the standout characteristics of the Craftsman 917.37892 is its robust engine. Powered by a reliable Briggs & Stratton 19 horsepower engine, this mower provides ample power to tackle tough grass and uneven terrains. The reliable engine ensures efficient performance, allowing users to cover more ground in less time. Its electric start feature makes starting the mower a breeze, eliminating the need for manual pull starts.

The mowing deck of the Craftsman 917.37892 is designed for precision and flexibility. With a 42-inch cutting deck, it offers an optimal balance between maneuverability and cutting efficiency. The deck height is adjustable, giving users the ability to customize their mowing height, which is essential for achieving the desired lawn appearance. Furthermore, the deck is equipped with a mulching capability, allowing users to finely chop grass clippings and return them to the lawn as natural fertilizer.

In terms of comfort, the Craftsman 917.37892 features an ergonomic seat and a user-friendly control panel. The high-back seat provides support during long mowing sessions, while the easy-to-reach controls make navigating the mower straightforward even for novice users. The mower's turning radius is tight, allowing it to maneuver around flower beds and landscaping with ease.

Technologically, the Craftsman 917.37892 boasts a durable construction featuring a steel frame and front axle, ensuring stability and longevity. Its unique rear-wheel drive enhances traction and control, aiding in the management of various terrains. The machine is also designed with safety features like an automatic shut-off that engages when the operator leaves the seat, providing peace of mind during operation.

Overall, the Craftsman 917.37892 combines power, comfort, and advanced technology to deliver an exceptional mowing experience. Whether managing a small residential lawn or tackling a larger property, this riding mower stands out as a practical choice for anyone looking to maintain a vibrant and healthy lawn. With its combination of features, the Craftsman 917.37892 ensures efficient performance, making it a valuable addition to any home gardening toolkit.