Craftsman 917270841 owner manual iNTERLOCKS AND RELAYS

TO ATTACH JUMPER CABLES -

•Connect each end of the RED cable to the POSITIVE (+) terminal of each bat-

tery, taking care not to short against chassis.

o Connect one end of the BLACK cable to the NEGATIVE (-) terminal of fully charged battery.

°Connect the other end of the BLACK cable to good CHASSIS GROUND, away from fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER -

o Remove BLACK cable first from chassis and then from the fully charged battery. o Remove RED cable last from both bat-

teries.

Positive Terminal Negative Terminal

Battery

Positive Terminal Negative Terminal

TO REPLACE HEADLIGHT BULB

o Raise hood,

o Pull bulb holder out of the hole in the

backside of the grill.

,Replace bulb in holder and push bulb holder securely back into the hole in the

backside of the grill, o Close hood.

iNTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or pre- vent it from starting,

o Check wiring. See electrical wiring dia- gram in the Repair Parts section of this manual.

TO REPLACE FUSE

Replace with 30 amp automotive-type plug-infuse. The fuse holder is located behind the dash.

26