BELT INSTALLATION -

1.Work belt around both mandrel pulleys and idler pulleys

2.Make sure belt is in all pulley grooves and inside all belt guides.

3.Install mower (See "To Install Mower" in this section of this manual).

Mandrel

Idler

With Parking Brake "Engaged"

Nut "A"

Jam Nut

g

Arm

TO CHECK AND ADJUST BRAKE

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than five (5) feet to stop at highest speed in highest gear on a level, dry concrete or paved surface, then brake must be checked and adjusted.

TO CHECK BRAKE

1.Park tractor on a level, dry concrete or paved surface, depress clutch/brake pedal all the way down and engage parking brake.

2.Place gear shift lever in neutral (N)

position.

The rear wheels must lock and skid when

you try to manually push the tractor for- ward. If the rear wheels rotate, the brake

needs to be adjusted or the pads need to - be replaced.

TO ADJUST BRAKE

1.Depress clutch/brake pedal all the way down and engage parking brake.

2.Measure distance between brake oper- ating arm and nut "A" on brake rod.

3.If distance is other than 1-1/2", loosen jam nut and turn nut "A" until distance becomes 1-1/2". Retighten jam nut against nut "A".

4.Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than five (5) feet in highest gear, further maintenance is neces- sary. Replace brake pads or contact a Sears or other qualified service center.

TO REPLACE MOTION DRIVE BELT

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

BELT REMOVAL -

1.Remove mower (See "TO REMOVE MOWER" in this section of manual).

NOTE: Observe entire motion drive belt and position of all belt guides and keepers.

2.Remove belt from stationary idler and clutching idler.

3.Remove belt downward from around engine pulley.

4.Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keepers.

5.Remove belt from center span keeper and pull belt away from tractor.

BELT INSTALLATION -

1.Carefully work new belt down between transaxle belt keepers and onto the input pulley.

2.Slide belt into the center span keeper.

3.Pull belt toward front of tractor and roll around the top groove of engine pulley.

4.Install belt through stationary idler and clutching idler.

5.Make sure belt is in all pulley grooves and inside all belt guides and keepers.

6.Install mower (See "-ro INSTALL MOWER" in this section of manual).

23

Page 23
Image 23
Craftsman 917272673 owner manual To Replace Motion Drive Belt

917272673 specifications

The Craftsman 917272673 is a powerful and versatile lawn tractor designed for homeowners seeking a reliable solution for lawn maintenance. This robust machine combines functionality with innovative technology, making it an essential addition to any garden or yard.

One of the standout features of the Craftsman 917272673 is its potent engine. Powered by a reliable 24 HP V-Twin Kohler engine, it delivers the necessary torque and power to handle various cutting conditions. This engine ensures efficient performance, whether you're tackling tall grass or dealing with uneven terrain. The hydrostatic transmission also enhances ease of use, allowing for smooth acceleration and seamless transitions between speeds without the need for manual gear shifts.

The design of the Craftsman 917272673 promotes user comfort and support. The adjustable high-back seat provides ample support during lengthy mowing sessions, ensuring that users remain comfortable while navigating their lawns. Additionally, the ergonomic steering wheel and easy-access controls simplify the driving experience, allowing for precise maneuverability around obstacles like flower beds and trees.

The cutting deck is another remarkable feature of this lawn tractor. With a 46-inch cutting width, users can cover significant ground efficiently. The deck’s dual-blade system not only enhances cutting performance but also provides a clean and even cut. The cutting height can be easily adjusted through six different positions, allowing for personalized lawn care that caters to various grass types and growth heights.

Furthermore, the Craftsman 917272673 includes technological advancements such as a reinforced steel frame, making it durable enough to withstand regular use and the wear and tear of outdoor conditions. The tractor is also equipped with a built-in mulching capability, enabling users to finely chop grass clippings and return them to the soil, promoting healthy grass growth while minimizing waste.

Maintenance is simplified with features like an easy-access oil filter and engine access, which makes routine checks and servicing hassle-free. This commitment to user-friendly maintenance ensures that the Craftsman 917272673 remains in peak condition for many mowing seasons.

With its combination of power, comfort, and advanced technologies, the Craftsman 917272673 is a top choice for homeowners looking for an effective lawn care solution that blends performance with convenience. Whether you own a small yard or a larger landscape, this lawn tractor is poised to meet diverse mowing needs efficiently.