Read Owner’s Manual. Do not attempt to operate equipment until

you have read Owners Manual for Safety, Operation, and Maintenance Instructions.

Note: Included with your unit is a video cassette that demonstrates how to operate your pressure washer. If you have a video cassette recorder you should to view the video before operation.

Never adjust spray pattern when spraying. Never put hands in front of spray nozzle to adjust spray pattern you could be

injured.

Stopping Your Pressure Washer

Do not run pump without the water supply connected and turned on.

Failure to do so will result in pump damage.

Move throttle control to the stop position to turn pressure washer off.

THROTTLE

CONTROL

Simply shutting OFF engine will not release pres- sure in the system. After engine has stopped, squeeze the trigger on the spray gun for about 3 seconds to relieve pressure. Spray stream will decrease in length.

IMPORTANT: This unit is equipped with a thermal relief valve. If unit is allowed to run for several minutes without pressing the trigger on the spray gun, several drops of water may be released through this valve to cool the unit. This small amount of water will drip from the bottom of the pump.

Before Starting The Engine

To operate the engine you will need to do the following.

Always check engine oil level before every start. Running engine

low of oil or out of oil could result in serious damage.

Engine Oil

Your unit has been shipped without oil in the engine. A bottle of SAE 30 weight oil is included in the carton. Remove oil dip stick located on top of the engine. Oil capacity is about 20 ounces of oil. The oil dip stick is clearly marked with a line that tells you when unit has enough oil. To check oil, place dipstick into oil fill. Tighten dipstick then remove. Do not fill above this point. Pour slowly.

NOTE: When adding oil to the engine crankcase, use a high quality detergent oil classified “For Service SF, SG, SH”, rated SAE 30 weight. Use no special additives.

Select the oil’s viscosity grade according to your ex- pected operating temperatures.

colder <——-----———40°F——————> warmer

Synthetic 5W-30

l SAE 30

Although multi-viscosity oils (5W30, 10W30, etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 40°F. Check your engine oil level more frequently to avoid possible damage from running low on oil. Oil sump capacity is 20 ounces.

Gasoline

Your pressure washer engine is 4 cycle. Use unleaded fuel only.

Do not overfill the fuel tank. Always allow room for fuel expansion.

Never fill fuel tank indoors. To avoid explosion and injury, never fill

fuel tank when engine is running or hot. Do not smoke or have open flame when filling fuel tank.

D24150

8 - ENG

Page 8
Image 8
Craftsman 919.670281, D2415 owner manual Stopping Your Pressure Washer, Before Starting The Engine, Engine Oil, Gasoline

D2415, 919.670281 specifications

The Craftsman 919.670281, D2415 is a versatile and robust air compressor that is essential for both home and professional use. This model combines efficiency, reliability, and power, making it a popular choice among DIY enthusiasts and contractors alike.

One of the standout features of the Craftsman 919.670281 is its powerful motor. With a 1.5 horsepower motor, this air compressor can easily handle a variety of tasks, ranging from inflating tires to powering tools like nail guns and paint sprayers. Its high-performance capabilities ensure that it can keep up with the demands of various jobs, providing a steady air supply whenever needed.

The design of the Craftsman 919.670281 is notable for its portability. Equipped with a sturdy handle and compact footprint, this compressor can be easily transported from one location to another, whether you are working in your garage or on a construction site. The lightweight build also contributes to its user-friendliness, allowing operators to move it around without any hassle.

Another essential characteristic of this model is its oil-free pump design. This feature not only reduces maintenance but also enhances longevity, as it eliminates the need for regular oil changes. The oil-free operation leads to cleaner air output, making it a better option for applications that require a non-oiled air supply, such as spray painting or automotive work.

The Craftsman 919.670281 also boasts a 6-gallon tank capacity, enabling it to store ample air pressure for extended use. This tank size strikes a perfect balance, ensuring that sufficient air is available while still remaining portable. The quick recovery time allows users to get back to work without prolonged interruptions, making it efficient for time-sensitive tasks.

Additionally, the compressor is equipped with a user-friendly control panel, featuring easy-to-read gauges and a simple on/off switch. This intuitive setup enables users to monitor pressure levels and operate the unit with minimal effort, even for those who are new to air compressors.

In summary, the Craftsman 919.670281, D2415 is a dependable air compressor that combines powerful performance with user-friendly features. Its portability, oil-free pump design, and 6-gallon tank capacity make it ideal for a wide range of applications, solidifying its position as a crucial tool for both home improvement projects and professional work environments. Whether for inflating, nailing, or painting, this compressor delivers efficiency and reliability, making it a valuable addition to any toolkit.