Use clean, fresh, regular unleaded gasoline with a minimum of 85 octane. Do not mix oil with gasoline.

If unleaded fuel is unavailable leaded fuel may be used.

IMPORTANT: It is important to prevent gum deposits from forming in essential fuel system parts such as the carburetor, fuel filter, hose or tank during storage. Also, experience indicates that alcohol-blended fuels (called gasohol or using ethanol or methanol) can attract mois- ture which leads to separation and formation of acids during storage. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or longer. Never use engine or carburetor cleaner products in the fuel tank or perma- nent damage may occur.

Never start pressure washer without water source turned on

and connected to pressure washer. Failure to do so will cause pump damage.

To Start Your Pressure Washer

Remove gas cap.

Add unleaded gasoline, slowly, to fuel tank.

Do not overfill.

Connect garden hose to the water inlet on the pressure washer. Tighten by turning counterclock- wise.

PUMP

INLET

PUMP

DISCHARGE

Connect high pressure hose to discharge on pump.

Connect the garden hose to the water spout and turn water supply on.

Squeeze trigger on pressure washer wand to relieve air pressure caused by turning on the water. Water will spew out of the gun in a thin stream. This will make it easier to start the engine.

Engage the safety latch on the spray gun. This locks the trigger in place and keeps you from accidentally spraying a high pressure stream.

SAFETY

LATCH

On the engine there is a choke/run lever. Place lever to the choke position.

On the engine there is a throttle control lever. Place throttle to the rabbit position. Always start engine with throttle in the rabbit (high speed) position.

CHOKE

THROTTLE

CONTROL (In Rabbit position)

Grasp the starter grip and pull slowly until resis- tance is felt, then pull firmly to start engine.

NOTE: If engine does not start right away, squeeze the trigger on the gun to relieve air pressure caused by turning on the water. Water will spew out of the gun in a thin stream. This will make it easier to pull start the engine. If more than five pulls, place choke lever back to run position.

When engine starts, gradually move choke lever to RUN position.

For hot engine restarts, make sure throttle is in the rabbit (high speed) position and the choke lever is in the RUN position.

Grasp the starter grip and pull slowly until resistance is felt, then pull firmly to start engine.

IMPORTANT: This unit is equipped with a thermal relief valve. If unit is allowed to run for several minutes without pressing the trigger on the spray gun, several drops of water may be released through this valve to cool the unit. This small amount of water will drip from the bottom of the pump.

9 - ENG

D24150

Page 9
Image 9
Craftsman D2415, 919.670281 owner manual To Start Your Pressure Washer

D2415, 919.670281 specifications

The Craftsman 919.670281, D2415 is a versatile and robust air compressor that is essential for both home and professional use. This model combines efficiency, reliability, and power, making it a popular choice among DIY enthusiasts and contractors alike.

One of the standout features of the Craftsman 919.670281 is its powerful motor. With a 1.5 horsepower motor, this air compressor can easily handle a variety of tasks, ranging from inflating tires to powering tools like nail guns and paint sprayers. Its high-performance capabilities ensure that it can keep up with the demands of various jobs, providing a steady air supply whenever needed.

The design of the Craftsman 919.670281 is notable for its portability. Equipped with a sturdy handle and compact footprint, this compressor can be easily transported from one location to another, whether you are working in your garage or on a construction site. The lightweight build also contributes to its user-friendliness, allowing operators to move it around without any hassle.

Another essential characteristic of this model is its oil-free pump design. This feature not only reduces maintenance but also enhances longevity, as it eliminates the need for regular oil changes. The oil-free operation leads to cleaner air output, making it a better option for applications that require a non-oiled air supply, such as spray painting or automotive work.

The Craftsman 919.670281 also boasts a 6-gallon tank capacity, enabling it to store ample air pressure for extended use. This tank size strikes a perfect balance, ensuring that sufficient air is available while still remaining portable. The quick recovery time allows users to get back to work without prolonged interruptions, making it efficient for time-sensitive tasks.

Additionally, the compressor is equipped with a user-friendly control panel, featuring easy-to-read gauges and a simple on/off switch. This intuitive setup enables users to monitor pressure levels and operate the unit with minimal effort, even for those who are new to air compressors.

In summary, the Craftsman 919.670281, D2415 is a dependable air compressor that combines powerful performance with user-friendly features. Its portability, oil-free pump design, and 6-gallon tank capacity make it ideal for a wide range of applications, solidifying its position as a crucial tool for both home improvement projects and professional work environments. Whether for inflating, nailing, or painting, this compressor delivers efficiency and reliability, making it a valuable addition to any toolkit.