Manuals / Craftsman / Lawn and Garden / Portable Generator

Craftsman 919.67937 manual General RECOMMENDATBON$, Generator Maintenance, Engine Maintenance

Models: 919.67937

1 34
Download 34 pages 21.13 Kb
Page 14
Image 14

GENERAL RECOMMENDATBON$

The warranty of the generator does not cover items that have been subjected to operator abuse or negHigence. To receive full vaHuefrom the warranty, operator must maintain the generator as instructed in this manual

Some adjustments will need to be made periodically to maintaining your generator.

GENERATOR MAINTENANCE

Your generator shouHd be kept dean and dry at aHtimes. The generator shouHd not be stored or operated in enviroments that incHudes excessive moisture, dust or any corrosive vapors. Ifthese substances are on the generator, dean with a cloth or soft bristHebrush. Do not use a garden hose or anything with water pressure to cHeanthe genera- tor. Water may enter the cooling air slots and could possi- bly damage the rotor, stator and the internal windings of the gen head.

All adjustments in the Maintenance section of this manual should be made at least once each season.

ENGINE MAINTENANCE

Changing Engine Oim

For a new engine, change oil after the first 5 hours of operation. Thereafter, change oil after every 50 hours of operation.

Change the oil while the engine is still warm. The oil will flow freely and carry away more impurities. Make sure the engine is level when filling, checking, or changing oil.

Change the oil as follows:

To keep dirt, grass clippings, etc., out of the engine, clean the area around the drain plug and dipstick before removing it.

Remove the oil drain plug and dipstick. Tilt the engine slightly towards the oil drain to obtain better drainage. Be sure to allow ample time for complete drainage.

Reinstall the drain plug. Make sure it is tightened securely.

Fill the crankcase with new oil of the proper type, to the Full mark on the dipstick. Always check the level with the dipstick before adding more oil.

Reinstall the oil fill cap or plug and tighten securely.

FULL_

Service Air Cleaner

NOTE: Do not use petroleum solvents, e.g., kerosene, which will cause the cartridge to deteriorate. Do not use pressurized air to clean cartridge. Pressurized air can damage the cartridge.

To service air cleaner follow these steps:

1.Unscrew cover screws. Remove cover and air cleaner assembly.

2.Remove cartridge from cover, then retainer (if equipped) and pre-deaner.

To service pre-deaner, wash in liquid detergent and water. Squeeze dry in a clean cloth. Saturate in engine oil. Squeeze in clean, absorbent cloth to remove all excess oil. Replace if very dirty or damaged.

To service cartridge, clean by tapping gently on a flat surface. Do not oil cartridge. Replace if dirty or dam- aged.

3.Reassemble pre-deaner or retainer (if equipped.) Place in cover with pre-cleaner mesh side toward cartridge. Place cartridge in retainer in cover.

4.Push cover and air cleaner assembly squarely onto base (tabs must be in slots, if equipped) and hold firmly. Tighten cover screws securely.

Do not clean engine with a forceful spray of water because water could contaminate fuel system. With a brush or cloth clean finger guard after every use to prevent engine damage caused by overheating.

14 -- ENG

Page 13 Page 15
Page 14
Image 14
Craftsman 919.67937 manual General RECOMMENDATBON$, Generator Maintenance, Engine Maintenance, Changing Engine Oim
Page 13 Page 15

919.67937 specifications

The Craftsman 919.67937 is a high-performance air compressor designed to meet the demands of both professional and DIY users. This versatile compressor is particularly appreciated for its durability, efficiency, and user-friendly features. With a robust design, it offers an impressive array of specifications and technologies that set it apart from other models in its class.

One of the standout features of the Craftsman 919.67937 is its powerful motor. Equipped with a 1.5 HP motor, this compressor generates enough power to handle a variety of tasks, from inflating tires to powering pneumatic tools. The unit operates at a maximum pressure of 135 PSI, providing ample air pressure for various applications while ensuring quick recovery times. The 6-gallon capacity tank allows for extended use without the need for frequent refilling, making it ideal for prolonged jobs.

Portability is another key characteristic of the Craftsman 919.67937. Weighing in at a manageable level and featuring a compact design, it is easy to transport from one job site to another. The integrated handle and rubber foot pads add to its stability and make it easy to move without risking tipping or damage during transport.

The compressor is also fitted with a user-friendly control panel that includes an easy-to-read pressure gauge, allowing users to monitor air pressure levels at a glance. The quick-connect couplers enable fast tool changes, saving valuable time when switching between different pneumatic applications. Additionally, this model is engineered to be quieter than many comparable compressors, making it suitable for indoor use or residential areas without causing excessive noise disturbances.

In terms of safety, the Craftsman 919.67937 includes several features designed to protect the user and enhance longevity. The thermal protection feature prevents the motor from overheating during prolonged use. The rubberized feet help minimize vibrations and maintain stable operation during use.

Overall, the Craftsman 919.67937 is a versatile and reliable air compressor that provides excellent performance for a wide range of applications. Its combination of power, portability, and user-friendly features makes it a standout choice for both professionals and hobbyists looking for a dependable air compressor. Whether tackling home improvement projects or engaging in professional tasks, the Craftsman 919.67937 rises to the occasion with ease.