Craftsman 919.76902 manual Aution Failure t-replacethe plug will result, Checklist

Out tie wrap off	of h{gh pressure	hose° Unwind	,	Your units pump		is shipped with	a
high pressure hose to attach the		threaded end to		temporary	plug	that must be replaced with a
the gun° Tighten	with adjustable	wrench.		breather	cap, This plug is located		over the

pump's oil port. Unscrew and remove this plug. Remove the breather cap from the bag attached to the plug and install it in the pump's oil port,,

6.Connect chemical hose to the chemical injector

hose barb on pump,

_REATHER

CAP

CHEMICAL
INJECTOR		_	AUTION: Failure t_-replacethe plug will result
Hose	PUMP
			in serious pump damage.

7, Connect high pressure hose to the quick connect outlet on pressure washer,

QUICK

CONNECT

NOTE; Always keep hose away from engine muffler,

g.Place assembled gun and wand on pressure handle bracket as shown,

Checklist

Before going any further please review the foHowlng:

-Be sure you have completed assembly instruction,,

. Double check all fittings to be sure they are tight.,

IMPORTANT= Before any attempt to start your pres- sure washer be sure to check engine oil (See Operation under Engine Oil, page 9,,)