Installation Instructions

EXHAUSTING THE DRYER

WARNING – To reduce the risk of fire or personal injury:

•This dryer must be exhausted to the outdoors.

•Use only metal duct.

•Do not terminate exhaust in a chimney, any gas vent, under an enclosed floor (crawl space) or into an attic. The accumulated lint could create a fire hazard.

•Provide an access for inspection and cleaning of the exhaust system, especially at turns. Inspect and clean at least once a year.

•Never terminate the exhaust into a common duct with a kitchen exhaust. A combination of lint and grease could create a fire hazard.

•Do not obstruct incoming or exhausted air.

TOOLS AND MATERIALS YOU WILL NEED TO INSTALL EXHAUST DUCT

❒Phillips-head screwdriver

❒Duct tape or duct clamp

❒Rigid or UL-listed flexible metal 4″ (10.2 cm) duct

❒Vent hood

EXHAUST SYSTEM CHECKLIST

HOOD OR WALL CAP

•Terminate in a manner to prevent back drafts or entry of birds or other wildlife.

•Termination should present minimal resistance to the exhaust airflow and should require little or no maintenance to prevent clogging.

•Never install a screen in or over the exhaust duct.

•Wall caps must be installed at least 12″ above ground level or any other obstruction with the opening pointed down.

•If roof vents or louvered plenums are used, they must be equivalent to a 4″ dampened wall cap in regard to resistance to airflow, prevention of back drafts and maintenance required to prevent clogging.

SEPARATION OF TURNS

•For best performance, separate all turns by

at least 4 ft. of straight duct, including distance between last turn and dampened wall cap.

For turns less than 4 ft. apart, see the Ducting Component Equivalency Chart.

SEALING OF JOINTS

•All joints should be tight to avoid leaks. The male end of each section of duct must point away from the dryer.

•Do not assemble the ductwork with fasteners that extend into the duct. They will serve as a collection point for lint.

•Duct joints should be made air- and moisture-tight by wrapping the overlapped joints with duct tape or aluminum tape.

•Horizontal runs should slope down toward outdoors 1/4″ per foot.

INSULATION

•Ductwork that runs through an unheated area or is near air conditioning should be insulated to reduce condensation and lint buildup.

24

Page 23 Page 25
Page 24
Image 24
GE UPGT650 operating instructions Tools and Materials YOU will Need to Install Exhaust Duct, Exhaust System Checklist
Page 23 Page 25

UPGT650 specifications

The GE UPGT650 and DPGT650 are advanced gas turbine models developed by General Electric, known for their cutting-edge technology and high efficiency. Designed primarily for power generation and industrial applications, these gas turbines represent the latest in innovation and performance in the energy sector.

At the heart of the UPGT650 is its high-efficiency design that optimizes fuel consumption while reducing emissions. This gas turbine operates at a high pressure ratio, which significantly enhances its overall efficiency, making it a preferred choice for operators seeking to minimize operational costs while maximizing output. The UPGT650 boasts a fuel flexibility feature, enabling it to run on various fuels, including natural gas and liquid fuels, catering to different operational needs and geographical conditions.

The DPGT650 variant, specifically developed for applications requiring high reliability and performance in distributed power generation, offers similar efficiency benefits while providing enhanced operational flexibility. Its modular design allows for easy maintenance and upgrades, which is crucial for facilities needing to adapt to changing energy demands and regulatory environments.

Both turbine models incorporate advanced technologies such as advanced cooling systems to maintain optimal operating temperatures and enhance durability. The utilization of advanced materials in the turbine blades contributes to their ability to withstand high thermal and mechanical stress, further improving performance longevity. Additionally, the turbines are equipped with sophisticated control systems that enable operators to achieve precise load management and efficient power dispatch.

A critical characteristic of the UPGT650 and DPGT650 is their environmental performance. These turbines are engineered to meet stringent emissions standards, effectively reducing CO2 and NOx emissions. This makes them suitable for regions with strict environmental regulations, appealing to companies focused on sustainability and environmental responsibility.

In summary, the GE UPGT650 and DPGT650 gas turbines stand out in the energy landscape for their efficiency, reliability, and environmental performance. With features like fuel flexibility, advanced cooling technologies, and modular design, they are poised to meet the evolving demands of the power generation industry, driving the transition towards cleaner and more efficient energy systems.
Top Page Image Contents