'Cleaning Pre-Ciean and Air Cleaner Catridge

To cleal_ pro-cleaner and air cleaner cartridge wash in _[_quiddetergent and water. Allow to dry thoroughly

. _eforel using. Do not oil pre-cleanero Replace if very dirty or damaged.

To service air cleaner follow these steps:

1.Unscrew cover screws, Remove cover, foam pro - cleaner, and air cleaner cartridge assembly,,

2.Remove cartiridge from cover, then retainer (if equipped) and pre-cleaner_

3, To clean pre-cteaner and air cleaner cartridge, wash in liquid detergent and water. Allow to dry thoroughly before using Do not oil l;he prec!eaner or cartridge, Replace if very dirty or damaged..

NOTE_ Do not use petroleum solvents, e.g., kerosene, which wilt cause the cartridge to deteriorate., Do not use pressurized airto clean cartridge. Pressurized air can damage the cartiridge.

4.Reassemble pro-cleaner or retainer (if equipped.) Place in cover with pre-cleaner mesh side toward cartridge. Place cartridge in retainer in cover°

5, Push cover and air cleaner assembly squarely onto base (tabs must be in slots, tf equipped) and hold firmly° Tighten cover screws securely.

Check Engine-- Guard/Muffler

Do not clean engine with a forceful spray of water because water could contaminate fuel system° With a brush or cfoth clean finger guard after every use tO prevent engine damage caused by overheating°

RNGEP,

GUARD

Before running engine, clean muffler area to remove el! combustible debris.

CLEAN

Clean and Replace Spark Plug

Change the spark plug every 100 hours of operation or once each year, whichever comes first. This will help your engine to start easier and run better,

.030" (o.7_MM)

RESISTOR

14

Page 14
Image 14
Craftsman 919.76902 manual Cleaning Pre-Ciean and Air Cleaner Catridge, Check Engine-- Guard/Muffler, 030 o.7MM, Resistor