GENERAL MAINTENANCE AND CLEANING

Before any cleaning operation, switch the humidifier off and unplug it.

1.Always unplug the unit before cleaning.

2.The humidifier must be drained and cleaned before storing.

3.Once unplugged the exterior of the unit may be cleaned by wiping with a dry cloth. Caution: The ON/OFF switch must be thoroughly dry before unit is again plugged into power source.

4.There may be some lime deposits in the nebulizer, particularly in areas with hard water. Overcome this drawback by cleaning the nebulizer with water and vinegar on a soft cloth regularly, as follows:

A.Dampen a cloth with vinegar and wipe the nebulizer gently, until the lime deposits disappear completely.

B.Rub down gently with a dry cloth and remove remains of humidity.

C.Do not rub the nebulizer with solid objects.

D.Do not clean with chemical products

5.When cleaning the water basin do not place the nebulizer directly under the water tap.

6.Never immerse the unit in water or let water enter the fan vent (see figure 3 on page 4) or any other openings.

7.It is normal for water to be in the water basin. However water must not get inside the central body. If this should happen, take the humidifier to an authorized service center before using it again.

8.Clean the inside of the water tank at least once a week, as follows:

A.Fill the tank with clean water adding a few drops of bleach. Close the tank completely with its cap and shake by holding the tank with both hands. Do not hold by handle while shaking the tank.

B.Rinse thoroughly.

Note: Water accumulated over long periods may create bacteria and mildew (fungus). It is important to remove the water in the humidifier if the humidifier is not being used. Always use fresh clean water when filling the water basin.

9.To clean the water level sensor remove the plastic cap on the pin by pulling it up (see Fig.12). Remove the water level sensor and cap and clean by wiping the parts with a soft damp cloth. Replace the parts by first putting the water level sensor onto the pin and then pressing the plastic cap on the end of the pin to secure the sensor (see Fig.13). Do not use excessive force.

Plastic Cap

 

 

Fig. 11

Fig. 12

Fig. 13

9

Page 9 Page 11
Page 10
Image 10
Crane EE-4109 manual General Maintenance and Cleaning
Page 9 Page 11

EE-4109 specifications

The Crane EE-4109 is a robust and versatile electromechanical actuator designed for a variety of industrial applications. Known for its reliability and performance, this actuator excels in environments where precision and durability are paramount.

One of the primary features of the EE-4109 is its impressive load capacity, which allows it to handle substantial weight while maintaining operational efficiency. Its ability to tackle demanding tasks makes it an ideal choice for industries such as manufacturing, material handling, and automation. The actuator is designed to facilitate smooth and controlled movements, ensuring that operations are carried out with minimal disruption.

The EE-4109 incorporates advanced technologies that enhance its functionality. One key technology is its high-performance electric motor, which provides superior torque and speed control. This motor is engineered to deliver consistent performance, even under heavy load conditions. Additionally, the actuator features a sophisticated feedback system that allows for real-time monitoring of its operational status, providing users with critical data to optimize performance.

In terms of design, the Crane EE-4109 is built with durability in mind. It features a robust housing constructed from high-strength materials, ensuring that it can withstand harsh environmental conditions such as temperature fluctuations, moisture, and dust. The actuator’s components are designed to minimize wear and tear, extending its lifespan and reducing maintenance costs.

Another notable characteristic of the EE-4109 is its modular design, which simplifies installation and allows for easy customization. Users can modify the actuator to fit specific application needs, enhancing its versatility across different use cases. The actuator is also compatible with various control systems, enabling seamless integration into existing setups.

Safety is a priority with the EE-4109, which includes built-in protection features to prevent overload and overheating. These safeguards ensure that the actuator operates within safe parameters, reducing the risk of malfunction and increasing operational reliability.

In conclusion, the Crane EE-4109 is a high-performance electromechanical actuator that combines superior load capacity, advanced technologies, and a robust design. Its versatility, durability, and safety features make it an excellent choice for industries in need of reliable motion control solutions. Whether for heavy lifting, automated processes, or precise positioning, the EE-4109 stands out as a leading actuator in its category.
Top Page Image Contents