Crane Plumbing 8XSE-HA Electrical Readings, Single Phase, Three Phase, Final Check, Manuals

CP&S control panel part no. and brand Number of pumps operated by control panel

NOTE: At no time should holes be made in top of control panel, unless proper sealing devices are utilized.

	Control panel manufactured by others
	Company name
	Model number
	Short circuit protection									Type
	Number and size of short circuit device(s)									Amp rating
	Overload type						Size			Amp rating
	Do protection devices comply with pump and motor Amp rating?
	Are all connections tight?
	Is the interior of the panel dry?
	ELECTRICAL READINGS:
	Single Phase:
	Voltage supply at panel line connection, Pump Off, L1, L2
	Voltage supply at panel line connection, Pump On, L1, L2
	Amperage: Load connection, Pump On L1						L2
	Three Phase:
	Voltage supply at panel line connection, Pump Off, L1 - L2								L2 - L3		L3 - L1
	Voltage supply at panel line connection, Pump On, L1 - L2								L2 - L3		L3 - L1
	Amperage: Load connection,			Pump On L1					L2		L3
	FINAL CHECK:
	Is pump seated on discharge properly?								Check for leaks?
	Does check valve(s) operate properly?
	Flow, Does station appear to operate at proper rate?								Pump down time
	Noise level:		High		Medium				Low
	Comments:
	Equipment difficulties during start-up:
	MANUALS:
	Has operator received pump instructions and parts manual?
	Has operator received electrical control panel diagram?
	Has operator been briefed on Warranty?
	Address of local CP&S Representative/Distributor:
	I have received the above information (Name of Operator)
	Name of Company
											Date:
	I Certify this report to be accurate (Name of Start-Up person)
	Employed By:										Date:
	Date and time of Start-Up
	Present at Start-Up
(		) Engineer:				(		) Operator:
(		) Contactor:				(		) Other:
	To be filled out by factory:
Start-Up form checked by:							Date warranty registration mailed:

22