Crane Plumbing 8XSE-HA operation manual Section A - Pump Specifications

SECTION: A - PUMP SPECIFICATIONS

DISCHARGE	8” NPT, 125 lb. Flange Horizontal
LIQUID TEMPERATURE ...	104°F (40°C) Continuous
VOLUTE	Cast Iron ASTM A-48, Class 30
	with Cast Iron Wear Ring
MOTOR HOUSING	Cast Iron ASTM A-48, Class 30
SEAL PLATE	Cast Iron ASTM A-48, Class 30
IMPELLER:	3 Vane, Enclosed with Bronze wear
Design
	ring and pump out vanes on back
	side. Dynamically Balanced ISO
	G6.3
Material	Cast Iron ASTM A-48, Class 30
SHAFT	416 Stainless Steel
SQUARE RINGS	Buna-N
HARDWARE	300 Series Stainless Steel
LIFTING CHAIN	Yoke, Galvanized
PAINT	Air Dry Enamel.
SEAL: Design	Tandem Mechanical, Oil Filled
	Reservoir.
Material	Rotating Faces - Carbone
	Stationary Faces - Ceramic
	Elastomer - Buna-N
	Hardware -300 Series Stainless
CORD ENTRY	25 ft. (7.6 m) Std. Cord. Epoxy
	Sealed Housing with Secondary
	Pressure Grommet for Sealing and
	Strain Relief

SPEED	870, 1150, 1750 RPM (Nominal)
UPPER BEARING:	Single Row, Ball, Grease Lubricated
Design
Load	Radial
LOWER BEARING:	Double Row, Ball, Grease Lubricated
Design
Load	Radial & Thrust
MOTOR: Design	NEMA B, Three Phase Torque Curve
	Air-Filled, Squirrel Cage Induction
	“UL” Listed for Class I, Groups C &
	D, Division 1, Explosion Proof
Insulation	Class F.
SINGLE PHASE	Capacitor Start/Induction Run.
	Start Capacitors included with
	pump assembly. Controls require
	external overload protection.
THREE PHASE	Dual Voltage 230/460; Requires
	Overload Protection to be Included
	in control panel.
MOISTURE SENSOR	Normally Open (N/O), Requires
	Relay in Control Panel
TEMP SENSOR	Normally Closed (N/C), Requires

Relay in Control Panel

OPTIONAL EQUIPMENT: Seal Material, Impeller Trims,

Additional Cord

inches

(mm)

8XSE20048HA - 49.06 (1246) 8XSE20058HA - 49.06 (1246) 8XSE25048HA - 49.06 (1246) 8XSE25058HA - 49.06 (1246) 8XSE30048HA - 49.06 (1246) 8XSE30058HA - 49.06 (1246) 8XSE30046HA - 49.06 (1246) 8XSE30056HA - 49.06 (1246) 8XSE40046HA - 49.06 (1246) 8XSE40056HA - 49.06 (1246) 8XSE50046HA - 49.06 (1246) 8XSE50056HA -49.06 (1246) 8XSE60046HA - 49.06 (1246) 8XSE60056HA - 49.06 (1246) 8XSE75046HA - 54.50 (1384) 8XSE75056HA - 54.50 (1384)

8XSE100044HA - 54.50 (1384) 8XSE100054HA - 54.50 (1384) 8XSE125044HA - 54.50 (1384) 8XSE125054HA - 54.50 (1384) 8XSE150044HA - 54.50 (1384) 8XSE150054HA - 54.50 (1384)

IMPORTANT !

1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALIDATE THE UL LISTING.

2.) A NON-SPARKINGBREAK AWAY FITTING MUST BE USED TO VALIDATE THE UL LISTING.

3.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS.

4.) THESE PUMPS ARE UL LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS.

5.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE.

4