Crate & Barrel Abbott 65 Media Console with, bolts, Secure, side panel, bottom panel, bottom panel, as shown, using a, left and right partitions, left and right side panels

ABBOTT 65” MEDIA STAND

bottom panel

A

left partition

B right partition

NOTE: Make sure pre-installed

door stops of left and right partitions are assembled towards the front

of assembly as shown

1A) Insert 4 wood dowels into bottom panel as shown.

B) Fit dowels of bottom panel into corresponding holes of left and right partitions as shown.

left partition

right partition

bottom panel

NOTE: Do not over tighten the screws

2Secure bottom panel with 8 large screws as shown, using a phillips head screwdriver. Do not over tighten the screws.

left and right side panels

3Insert 2 wood dowels into left and right side panels as shown.

left side panel

bottom panel

NOTE: Do not over tighten the bolts

right side panel

4Position assembly as shown. Fit dowels of left and right side panels into corresponding holes of bottom panel. Secure each side panel with 3 bolts as shown, using a screwdriver. Do not over tighten the bolts.

Made in China - r03 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 2 of 6