Crate & Barrel Abbott 65 Media Console OPTIONAL SAFETY MOUNTING INSTRUCTIONS, HINGE ADJUSTMENT, WALL, large, Insert, Insert, screw A, screw A, wall strap, wall strap, Loosen screw, large wall screw

ABBOTT 65” MEDIA STAND

OPTIONAL SAFETY MOUNTING INSTRUCTIONS

For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.

A.Insert large wall screw (not included) through end of wall strap and into wall as shown.

B.Insert small wall screw through end wall strap and into the top back of unit as shown.

Mounting assembly is now complete.

NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.

HINGE ADJUSTMENT

If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated.

1) Side to side adjustment:	2) Depth adjustment:
Loosen screw A, adjust gap	Loosen screw A, push hinge arm
with screw B and re-tighten	forwards or backwards, re-tighten
screw A.	screw A.

NOTE: Insert screws 3/4"-1" from the edge of the strapWALLsmall wall screwwall strap

3/4”-1”

large

wall screw (not included) (NOTE: Additional screw not included. Please consult your local hardware store.)

3)Height adjustment: Loosen screw C, adjust door height and re- tighten screw C.

A		A
		A	C
			C
		B	C
			C
	1	2	3
		2

Made in China - r03

Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com

Page 6 of 6