Crate & Barrel Abbott 65 Media Console pre-installed, screw, into, Insert, Attach, panel hinges, small screws, to corresponding, using a screwdriver, and secure each with, left and right side panels

ABBOTT 65” MEDIA STAND

back panel

8Attach back panel with 20 large screws as shown, using a screwdriver.

9With assistance of another adult, position unit upright. Attach 2 panel hinges to left and right side panels with 2 small screws.

left and right door fronts

NOTE: If doors are not aligned, refer to the Hinge Adjustment diagram at the end of these instructions

left door front

right door front

pre-installed screw

10Insert 2 door hinges into left and right door fronts and secure each with 2 small screws.

11Attach 2 door hinges of left and right doors to corresponding 2 panel hinges of left and right side panels as shown. Secure hinges with pre-installed screw using a screwdriver.

Made in China - r03 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 4 of 6