LOOP MEDIA STAND
right side panel
Make sure arrows on each cam points toward nearest edge with holes
left side panel
1Insert 4 cam screws, 2 cams, and 2 wood dowels into each side panel as shown. Make sure arrows on each cam points toward nearest edge with holes.
Secure cam screws with a phillips head screwdriver.
A | middle | |
panel | ||
|
B | bottom |
| panel |
2A) Insert 4 cams and 4 wooddowels into middle panel as shown.
B) Insert 2 cam screws and 4 wood dowels into bottom
panel as shown.
A | back | |
panel | ||
|
B | top |
| panel |
3A) Insert 8 cams, 4 cams screws and 12 wood dowels into back panel as shown.
B) Insert 10 cams screws into top panel as shown.
middle panel
bottom panel
4Place bottom panel onto a clean, padded surface, and fit middle panel onto cam screws of bottom panel as shown. With a screwdriver, turn each cam clock- wise until it securely engages each cam screw.
Made in China - r07 | Customer Service 800.967.6696 www.crateandbarrel.com | Page 2 of 4 |