Crate & Barrel Loop 54 Media Center cam, cams, cams, cams, cams, top panel, shelf pin, back panel, cam covers, shelf pins, support leg, bottom panel, adjustable shelves

LOOP MEDIA STAND

A B

back panel

B	bottom
	panel

5A. Insert 4 cams into bottom panel assembly as shown. Make sure arrows on each cam points towards nearest edge with holes.

B. Fit holes of back panel to cam screws of assembled unit as shown. Turn each cam clockwise to secure with a phillips head screwdriver. Make sure each cam securely engages each cam screw.

A

A

B

bottom panel

6A. Position unit face up as shown. Insert 4 cams into bottom panel as shown. Fit left and right side panels onto assembled unit as shown. Secure all cams.

B. Attach support leg to assembled unit as shown. Turn leg clockwise to secure.

A

A

B

7A) With the assistance of another adult, carefully position unit upright. Carefully fit top panel onto assembled unit as shown. Secure all cams.

B) Conceal all exposed cams with cam covers.

A

A

B

8A) Insert 8 shelf pins into assembled unit at desired shelf heights. Press firmly to secure.

B) Place 2 adjustable shelves into assembled unit as shown. Make sure shelves are securely supported by each shelf pin.

Made in China - r07 Customer Service 800.967.6696 www.crateandbarrel.com Page 3 of 4