LOOP MEDIA STAND
NOTE:
Press the pins on top of
the doors down to install doors. Press the buttons on the back to release the pins and lock the doors into place.
right side |
|
door |
|
left side |
|
door | 9 Attach left door to assembled unit as shown. |
| |
| Carefully insert wheels of left door into back groove of |
| bottom panel. Press down the two levers and line up |
| with the back groove of top panel. Use the buttons to |
| release levers to secure door. Repeat steps for right |
front groove of bottom panel | door, inserting door into the front grooves instead of |
back groove of bottom panel | the back. |
| Assembly is now complete. |
B
B
Once the top rollers are engaged, adjust the wheel height to secure and level the doors
AA
Push this button down to remove door
A. If the doors are not operating smoothly, push the buttons down on the back doors to remove them from the unit as shown. Ensure that the buttons are locked in the down position and install the doors again making sure that the wheels on the bottom are aligned with the correct track on the bottom panel. Now pivot the door into place ensuring that the pins are inserted correctly into the tracks in the top panel.
B. To level the door, adjust the wheel height as shown above.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.
Made in China - r07 | Customer Service 800.967.6696 www.crateandbarrel.com | Page 4 of 4 |