Crate & Barrel Loop Three-Drawer Chest cams, cams, cams, crossbar, crossbar, cam screws, back panel, wood dowels, wood dowels, left side panel, left side frame, right side panel

LOOP 3 DRAWER CHEST

Arrow on each	A
cam points towards
edge with holes

B

C

1A) Place left side panel face down on a padded surface. Insert 4 cam screws into the holes as shown. Secure, but do not over tighten with a phillips head screwdriver.

B) Insert 3 cams into the large holes as shown, making sure the arrow on each cam points towards the nearest edge with holes.

C) Insert 2 wood dowels into the top edge of the panel. Repeat Steps A, B & C for the right side panel.

A Back Panel

B Crossbar

2A) Insert 6 wood dowels and 9 cams into back panel as shown.

B) Insert 2 wood dowels and 2 cams into crossbar as shown.

3With the assistance of another adult, carefully align dowels of back panel and crossbar with cam screws of left side frame and firmly fit into position.

4Secure 4 cams at the base of the back panel and cross- bar with a phillips head screwdriver. Turn each cam clock- wise until it securely engages each cam screw.

Made in China r08 Customer Service 800.967.6696 www.crateandbarrel.com Page 2 of 4