Crate & Barrel Loop Three-Drawer Chest cam, cam, left, top panel, cam screws, drawer front, right side panel, right drawer sides, phillips head screwdriver, phillips head screwdriver

LOOP 3 DRAWER CHEST

5Fit cam screws of right side panel into corresponding holes in the back panel and crossbar. Secure each cam with a phillips head screwdriver.

6Insert 9 cam screws into the underside of the top panel as shown.

7Fit top panel onto dowels of the assembly and secure each cam with a phillips head screwdriver.

8Slide left and right drawer sides up into slots on back of the drawer front. Make sure glide hardware is on the outside of the drawer sides and the vertical slots are at the back of the assembly as shown.

Made in China r08 Customer Service 800.967.6696 www.crateandbarrel.com Page 3 of 4