Crate & Barrel Paterson Corner Media Stand base, top panel, top panel, top panel, top panel, cam screws, back panel, back panel, wood dowels, small bolts, screwdriver, screwdriver, small bolts

PATERSON CORNER MEDIA STAND

NOTE: Do not over tighten the bolts

A top panel	large	NOTE: Make sure
	side panel
		ledge on panel is
	NOTE: Do not over	positioned as shown
	tighten the cam screws

B base top panel

1 A) Fit 13 wood dowels into top panel as shown.	2 Fit pre-installed dowels of top panel into correspond-
B) Insert 6 cam screws into base as shown. Secure, but	ing holes of large side panel. Secure large side panel
do not over tighten, cam screws using a phillips head	with 2 small bolts as shown, using a phillips head
screwdriver.	screwdriver. Do not over tighten the bolts.

back panel
NOTE: Make sure
ventilation holes of panel	large
are positioned as shown	side panel

3Fit pre-installed dowels of top panel into corresponding holes of back panel. Secure back panel with 2 small bolts as shown.

4Fit pre-installed dowels of top panel into corresponding holes of remaining large side panel. Secure large side panel with 2 small bolts as shown.

Made in China - r12 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 2 of 6