Crate & Barrel Paterson Corner Media Stand OPTIONAL WALL MOUNTING INSTRUCTIONS:, NOTE:, bracket, anti-tip, wall strap, large screw, small screws, wall bracket, plastic anchor

PATERSON CORNER MEDIA STAND

F wall

C plastic strap anchor

wall

bracket

D large	anti-tip
	bracket
screw

A smallscrew

OPTIONAL WALL MOUNTING INSTRUCTIONS:

For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.

A)Attach 1 anti-tip bracket to top of unit as shown, using 2 small screws.

B)Determine the final location of unit. Mark position on the wall, approximately 2" below the anti-tip bracket mounted to the back of the unit.

C)Drill a pilot hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall.

D)Attach the wall bracket to the wall by inserting 1 large screw through the wall bracket and into the plastic anchor in the wall.

E)Place the unit so the anti-tip bracket on the back edge is aligned with the wall bracket.

F)Lace one end of the wall strap through both brackets, and into the other end of the strap.

G)Pull the strap tightly until secure.

Repeat step A-G for remaining wall mounting assembly.

Wall mounting assembly is now complete.

NOTE:

If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.

Made in China - r13 Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com Page 6 of 6