PATERSON CORNER MEDIA STAND
right small side panel
left small side panel
5Secure left and right small side panels to top panel with 2 small bolts per side as shown.
NOTE: Do not over tighten the screws
left small side panel
B | right small |
| |
| side panel |
A 
back panel
6A) Secure large side panels to left/right small panels and back panel with 6 large screws as shown, using a phillips head screwdriver. Do not over tighten the screws.
B) Insert 13 wood dowels into assembled unit as shown.
C | base |
| |
NOTE: Make sure |
|
hole of barrel nut | A |
aligns with the | |
hole in nearest |
|
edge |
|
B
7A) Insert 6 cams and 2 barrel nuts into assembled unit as shown. Make sure arrows on each cam point toward nearest edge with holes. Using a screwdriver, align hole of each barrel nut with the hole in the nearest edge.
B) With the assistance of another adult, fit dowels of assembled unit into corresponding holes of base. With a screwdriver, turn each cam clockwise until it securely engages each cam screw.
C) Insert 2 large bolts into barrel nuts of small side panels. Make sure bolts securely engage each barrel nut.
NOTE: Make sure arrows on each cam point toward nearest edge with holes
Made in China - r13 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 3 of 6 |