WIEDEN MEDIA GAMING TOWER

NOTE: Do not over tighten the cam screws

left side panel

NOTE: Make sure arrows on each cam point toward nearest edge with holes

right side panel

1Insert 4 wood dowels, 4 cam screws and 4 cams into left and right side panels as shown. Make sure arrows on each cam point toward neasrest edge with holes. Secure, but do not over tighten, cam screws using a phillips head screw- driver.

A top panel

B

back panel

C fixed shelf

2A) Insert 4 wood dowels and 4 cam screws into top panel as shown.

B) Insert 8 cams into back panel as shown. C) Insert 4 cams, 2 wood dowels and 2 cam screws into fixed shelf as shown.

NOTE: Do not over tighten the bolts

base assembly

B

A bottom panel

bottom panel

 

3A) Attach base assembly to bottom panel with 8 bolts as shown. Secure, but do not over tighten, the bolts using an allen wrench.

B) With the assistance of another adult, carefully position assembled unit upright. Insert 6 wood dowels and 6 cam screws into bottom panel as shown.

fixed shelf

back panel

4Fit wood dowels of fixed shelf into corresponding holes of back panel. Using a phillips head screwdriver, turn cams clockwise until each cam securely engages each cam screw.

Made in China - r08

Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com

Page 2 of 5