WIEDEN MEDIA GAMING TOWER
OPTIONAL SAFETY MOUNTING INSTRUCTIONS
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.
A)Determine the final location of unit. Mark position on the wall, approximately 2” below the top of the unit as shown.
B)Drill a pilot hole in the wall stud. If a wall stud is not available, drill a hole in the wall that is slightly smaller in diameter than the plastic anchor. Gently tap the plastic anchor until the flange of the plastic anchor is flush with the wall.
C)Insert 1 large screw through end of wall strap and through plastic anchor in the wall as shown.
D)Insert small screw through end of wall strap and into back of unit as shown.
Mounting assembly is now complete.
NOTE: Insert screws | WALL | ||
from the edge of the strap | |||
|
| ||
|
| ||
|
|
|
wall
strap large screw
small screw
plastic anchor
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.
HINGE ADJUSTMENT
If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated.
1 | 2 | 3 |
A | A | C |
BB C
Side to side adjustment: Loosen screw A, adjust gap with screw B and
Depth adjustment: | Height adjustment: |
Loosen screw A, push hinge arm | Loosen screw C, adjust door |
forwards or backwards, | height and |
screw A and secure screw B with |
|
a 1/4 turn clockwise |
|
Made in China - r08 | Customer Service 800.967.6696 Latest instructions available at www.crateandbarrel.com | Page 5 of 5 |