BX-440H / BX-4115 ThunderBass Amplifier
Technical Specifications:
Maximum Input Signal Level Accepted | 17 volts peak to peak |
|
|
Input Power Requirements | 120VAC, 60Hz, 1200 watts max. |
|
|
Input Impedance | 500k ohms |
|
|
Signal to Noise Ratio | 75dB typical |
|
|
Output Power Rating | 250 watts RMS @ < 5% THD w/8 ohm load, 120VAC line |
| 440 watts RMS @ < 5% THD w/4 ohm load, 120VAC line |
|
|
Gain @ 1kHz | 67dB with EQ flat, Contour off |
|
|
EQ Section | 20dB range (±10dB) @ 40Hz, 100Hz, 225Hz, 625Hz, 1.6kHz, |
| 4kHz, 8kHz and 16kHz |
|
|
Internal Speaker |
|
Size/Type | 15” ThunderBass |
Magnet | 56 oz |
Voice Coil | 3” |
Impedance | 8 ohms |
|
|
Size and Weight, | |
Size and Weight, | |
|
|
1including rubber feet |
|
2without casters installed; casters add |
|
CRATE continually develops new products, as well as improves existing ones. For this reason,
specifications and information in this manual are subject to change without notice.
CRATE/SLM ELECTRONICS, A DIVISION OF ST. LOUIS MUSIC, 1400 FERGUSON AVENUE, ST. LOUIS, MO 63133 |