The Electronic Tuner:
20
20.ELECTRONIC TUNER (top panel): The electronic tuner is active whenever the amplifier is turned on, providing constant,
The Rear Panel (not shown):
21:AC LINE CORD: This grounded power cord is to be plugged into a grounded power outlet, wired to current electrical codes and compatible with the voltage, power, and frequency requirements stated on the rear panel. Do not attempt to defeat the safety ground connection.
21:FUSE: The fuse protects the amplifier from damages caused by a faulty AC power source and/or other problems. If the fuse opens, replace it ONLY with the same size and type. If fuses continue to fail, check the AC source – if the source is okay, contact your Crate dealer for service information.
22:CHANNEL SELECT / GAIN FOOTSWITCH JACK: Use this jack to connect the stereo 1/4” plug of the supplied
23:REVERB FOOTSWITCH JACK: Use this jack to connect the mono 1/4” plug of the supplied three- button footswitch for remote control of DSP on and off.
CONNECTING TO THE INSERT JACK:
The Insert jack (#16) allows you to patch an external effects device into the amplifier prior to its power amp stage. Use Crate’s STP201, STP202 or STP203
| ||||||
to Insert | TIP |
| RETURN | TIP | to Insert |
|
jack | RING |
| SEND | RING | jack |
|
| SLEEVE |
| GROUND | SLEEVE |
|
|
(STP201, 3' |
|
|
| (YPP117) |
|
|
STP202, 6' |
|
|
|
|
| |
STP203, 9') |
|
|
|
|
|
|
|
|
|
| T | R I |
|
|
|
|
| I P | N G |
|
T |
| R I |
|
|
|
|
I P |
| N G |
|
|
|
|
|
|
|
|
| ||
|
|
|
| MONO SHIELDED |
| |
|
|
|
| CABLES) |
| |
to | to |
|
| to | to |
|
effect | effect |
|
| effect | effect |
|
"OUT" | "IN" |
|
| "OUT" | "IN" |
|
jack | jack |
|
| jack | jack |
|
External Effect |
|
| External Effect | 5 | ||
|
|
|
|
|
|