GX-65 Amplifier
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | ||||||||||
1:INPUT: Connect your guitar here by means of a shielded instrument cable.
OVERDRIVE CHANNEL: A high gain channel designed to give you sounds from a slight edge to serious overdrive.
2:GAIN 1: Use this control to adjust the amount of moderate compression and distortion for the Overdrive channel. With the control rotated fully counter clockwise the sound will have a thick compressed quality. As you rotate the control clockwise the amount of distortion increases. Gain 1 produces less intense distortion than Gain 2 and is active when the Gain Select switch (#5) is in the out position.
3:GAIN 2: Use this control to adjust the amount of intense compression and distortion for the Overdrive channel. With the control rotated fully counter clockwise the sound will have a thick compressed quality. As you rotate the control clockwise the amount of distortion increases. Gain 2 produces more intense distortion than Gain 1 and is active when the Gain Select switch (#5) is depressed.
4:SHAPE: Working in conjunction with the Gain 2 control, rotate the Shape control until you find the sound you’re looking for. Rotating the control counter clockwise enhances the mid frequen- cies. Rotating the control clockwise enhances the low and high frequencies. (Only affects Gain 2 when active.)
5:GAIN SELECT: Use this switch to select Gain
1 (switch in the out position) or Gain 2 (switch depressed). A footswitch (#18) overrides this switch.
6:LOW: Use this control to adjust the low fre- quency output level of the Overdrive channel.
This control allows an adjustment range of 11dB at 80Hz.
7:HIGH: Use this control to adjust the high fre- quency output level of the Overdrive channel. This control allows an adjustment range of 10dB at 10kHz.
8:LEVEL: Use this control to adjust the output volume level of the Overdrive Channel. Use this control along with the Gain and Shape controls (#2, 3 & 4) to create a wide variety of sounds.
9:CHANNEL SELECT: Use this switch to select the Clean channel (switch in the out position) or the Overdrive channel (switch depressed). A footswitch (#21) overrides this switch. The adja- cent LEDs indicate which channel is selected.
CLEAN CHANNEL: A normal gain channel designed to give you crystal clear sounds.
10:LEVEL: Use this control to adjust the output volume level of the Clean Channel.
11:LOW: Use this control to adjust the low fre- quency output level of the Clean channel. This control allows an adjustment range of 22dB at 80Hz.
12:MID: Use this control to adjust the mid fre- quency output level of the Clean channel. This control allows an adjustment range of 14dB at 600Hz.
13:HIGH: Use this control to adjust the high fre- quency output level of the Clean channel. This control allows a range of 28dB at 10kHz.
14:REVERB LEVEL: Use this this control to adjust the amount of reverberation. With the control rotated fully counter clockwise the output signal is “dry” (no effect). As you rotate the con- trol clockwise the amount of effect increases.
