RFX200S
The Top Panel:
LOW | MID | HIGH | LOW | MID | HIGH |
STEREO |
|
|
|
|
|
GAIN |
| LEVEL | GAIN |
| LEVEL |
INPUT |
| 1 |
|
| 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | |||||||||||||
1:INPUT: Use this jack to connect your guitar to the amplifier by means of a shielded instrument cable.
CHANNEL 1 - Featuring a low gain FlexWave circuit for clean sounds or sounds with mild dis- tortion:
2:LOW: Use this control to adjust the low frequency level of Channel 1.
3:GAIN: Use this control to adjust the amount of distortion produced by Channel 1.
4:MID: Use this control to adjust the midrange frequency level of Channel 1.
5:LEVEL: Use this control to adjust the output level of Channel 1.
6:HIGH: Use this control to adjust the high frequency level of Channel 1.
7:CHANNEL 1 SELECT: This switch, when depressed, selects Channel 1 as the active channel. The adjacent LED illuminates when Channel 1 is active.
CHANNEL 2 - Featuring a medium gain FlexWave circuit for moderate distortion and crunch:
8:LOW: Use this control to adjust the low frequency level of Channel 2.
9:GAIN: Use this control to adjust the amount of distortion produced by Channel 2.
10:MID: Use this control to adjust the midrange frequency level of Channel 2.
11:LEVEL: Use this control to adjust the output level of Channel 2.
12:HIGH: Use this control to adjust the high frequency level of Channel 2.
13:CHANNEL 2 SELECT: This switch, when depressed, selects Channel 2 as the active channel. The adjacent LED illuminates when Channel 2 is active.
CHANNEL 3 - Featuring a high gain FlexWave circuit for extreme distortion and sustain:
14:LOW: Use this control to adjust the low frequency level of Channel 3.
15:GAIN: Use this control to adjust the amount of distortion produced by Channel 3.
16:MID: Use this control to adjust the midrange frequency level of Channel 3.
17:LEVEL: Use this control to adjust the output level of Channel 3.
18:HIGH: Use this control to adjust the high frequency level of Channel 3.
19:CHANNEL 3 SELECT: This switch, when depressed, selects Channel 3 as the active channel. The adjacent LED illuminates when Channel 3 is active.
4
