4
ENGLISH Explanation of general view
1Button
2 Battery cartridge
3 Lock button
4 Switch
5 Lamp mark
6 Lamp
7Bit
8Sleeve
9 Bit-piece
10 Standard bolt
11 Fastening torque
12 Fastening time
13 Proper fastening torque
14 High tensile bolt
SPECIFICATION
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
SPECIFIC SAFETY RULES
GEB012-2
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict
adherence to impact driver safety rules. If you
use this tool unsafely or incorrectly, you can
suffer serious personal injury.
1. Hold power tools by insulated gr ipping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal
parts of the tool “live” and shock the operator.
2. Always be sure you have a fi rm footing. Be sure
no one is below when using the tool in high loca-
tions.
3. Hold the tool fir mly.
4. Wear ear protectors.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious per-
sonal injury.
IMPORTANT SAFETY INSTRUCTIONS FOR
CHARGER & BATTERY CARTRIDGE
ENC007-2
1. Before using batt ery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2. Do not disasse mble battery cartridge.
3. If operating time has becom e excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow,
overheating, possible burns and even a break-
down.
6. Do not store t he tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
7. Do not incine rate the battery cartridge even if it
is severely damaged or is completely worn o ut.
The battery cartridge can explode in a fire.
8. Be careful not to drop or strike battery.
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum battery life
1. Charge the b attery cartridge before completely
discharged.
Always stop tool operation and charge the bat-
tery cartridge when you notice less tool power.
2. Never recharge a f ully charged battery cartridge.
Overcharging shortens the battery service life.
3. Charge the batte ry cartridge with room tempera-
ture at 10°C– 40°C (50 °F– 104°F). Let a h ot bat-
tery cartridge cool down before charging it.
Model TD020D
Capacities
Machine screw 3mm – 8 mm
Standard bolt 3 mm – 8 mm
High tensile bolt 3mm – 6 mm
Coarse thread 22mm– 45 mm
No load speed (min–1)2,300
Impacts per minute 3,000
Overall length Straight type 276mm
Pistol type 213 mm
Net weight 0.53kg
Rated voltage D.C.7.2V