Step 2: Insert the modem card
Do not force the modem card into the slot. Make sure that the gold finger PCI connector on the modem card is aligned with the PCI bus connector on the motherboard before you insert the card into the PCI expansion slot.
If it does not fit properly, gently remove it and try
again.
Step 3: Connect to power supply
1.Align the modem card with the PCI slot and press the card gently but firmly into the slot as shown in Figure
2
Unused brackets
1
PCI slot
ISA slot
Figure
2. Secure the modem card with the screw you had placed aside earlier.
1.Replace the computer casing.
2.Plug the power cord back into the wall outlet, and then turn on the computer.
To install drivers, refer to “Installing and Testing Modem Drivers” on page
Installing Hardware