694527.qxd 1/31/03 9:18 Page 6
Installation (Door reversal).
If you find that the direction of the door opening is not convenient, you can reverse it. The necessary holes on the opposite side of the cabinet have been made inthe factory and plugged.
*Remove the top hinge cover of the refrigerator door. Remove the door by unscrewing the hinge (the door is supported only by the bottom hinge) and remove the hinge washer.
*Unscrew the top strip, move it on the opposite side of the appliance and fasten it.
*Unscrew the bottom hinge and washer of the freezer door and the bottom hinge of the refrigerator door.
*Remove the corner caps from the door and reposition them (instead of the one with a hole insert the one without it, and vice versa).
*Take off the washer from the bottom hinge of the freezer door (by turning it in clockwise), unscrew the bottom hinge filling plug and screw the bottom hinge without a plug.
*Insert the filling plug and washer in the reverse order into the ho;e for the bottom hinge on the opposite side of the appliance.
*Put the freezer door on the bottom hinge.
*Turn the bottom hinge of the refrigerator door by 180˚, insert the hinge and the washer into the hole of the corner cap on the freezer door and fasten it. Use the same procedure for the top hinge of the freezer door and screw it on the opposite side of the upper door. Put the washer and the upper door on the hinge.
*Screw the top hinge of the refrigerator door and replcae the cover.
*Reposition the slide guides on the opposite side of both doors.
*Plug the remaining holes with the decorative caps.
*After you have reversed the door, check if the magnetic gasket seals correctly. It must not be creased and must seal all around the door.
6
